EPTMy PSU is: Corsair 550W
My RAM is corsair XMS3 1x3gb
[Q]Computer Overclocking
| Blogs > emucxg |
|
emucxg
Finland4559 Posts
My PSU is: Corsair 550W My RAM is corsair XMS3 1x3gb | ||
|
T.O.P.
Hong Kong4685 Posts
| ||
|
xmShake
United States1100 Posts
Make sure you have good cooling in your case too. | ||
|
emucxg
Finland4559 Posts
without prime95, my CPU is about 45C | ||
|
mahnini
United States6862 Posts
| ||
|
emucxg
Finland4559 Posts
On April 18 2010 04:32 mahnini wrote: you need to error check for much longer. i would say at least 5 hours. Ok, thanks I have only 3 hours till sleep. I will do it tommorrow I guess | ||
|
mahnini
United States6862 Posts
P.S. just leave it on while you sleep so you dont have to wait for it :D | ||
|
emucxg
Finland4559 Posts
On April 18 2010 04:38 mahnini wrote: 80C sounds high. i think the tjmax for intel processors is usually 100C but i would definitely try to keep it lower than 80C but i'm not sure it will actually cause problems. P.S. just leave it on while you sleep so you dont have to wait for it :D lol what if it burns my house = = | ||
|
mahnini
United States6862 Posts
| ||
|
emucxg
Finland4559 Posts
On April 18 2010 04:49 mahnini wrote: the processor will stop itself if it reaches a certain temperature ! are you sure? = = edit. ok.....but I dont wanna take any risk | ||
|
FragKrag
United States11538 Posts
make sure you run Prime95 for at least 6-8 hours imo. 80C is fine, but a bit on the high side imo. What are your volts? | ||
|
KOFgokuon
United States14886 Posts
| ||
|
emucxg
Finland4559 Posts
On April 18 2010 05:00 FragKrag wrote: yeah it'll stop itself at around 105C make sure you run Prime95 for at least 6-8 hours imo. 80C is fine, but a bit on the high side imo. What are your volts? Ai Overclock Tuner - Manual CPU Ratio Setting - Auto Intel (R) SpeedStep (TM) Tech - Enabled Intel (R) Turbo Mode Tech - Enabled BCLK Frequency - 181 PCIE Fequency - 100 CPU Voltage 1.20000v DRAM Bus Voltage - 1.64v | ||
|
FragKrag
United States11538 Posts
Your voltage looks fine. Not sure why your temps are high. | ||
|
emucxg
Finland4559 Posts
On April 18 2010 05:19 FragKrag wrote: I suggest turning off Turbo Mode because it could cause stability issues later on in tasks that are not multithreaded. Your voltage looks fine. Not sure why your temps are high. Yeah, maybe it because I have turned my fans to silent-mode on my bios settings... I hate noises >.< | ||
|
semantics
10040 Posts
On April 18 2010 05:19 FragKrag wrote: I suggest turning off Turbo Mode because it could cause stability issues later on in tasks that are not multithreaded. Your voltage looks fine. Not sure why your temps are high. ionno what his cooler is but turbo mode should be off for an oc. About ocing your 5770 i suggest using msi afterburner in conjunction with kombuster run kombuster and find the max of your memory first then bring up your core till stable s memory is the main issue with the 5770. That's or evga precision will do. most times you can push that memory to about 1400 usually a bit less then that. but i like kombuster it's good to see hz on the core and memory becuase it goes down to the 10th place. | ||
|
emucxg
Finland4559 Posts
| ||
|
semantics
10040 Posts
| ||
|
emucxg
Finland4559 Posts
| ||
|
semantics
10040 Posts
| ||
| ||
