|
I don't know whats wrong with my stream.. I stream but for some reason I don't lag its just very choppy...
Let me explain, even when my FME is open I instantly lag, without even streaming.. I'm guessing its my output size which is at 1920x1080 right now.
I have an i7 with a Radeon 5850, 6GB, 1TB of space, and 2.80ghz. My download speed is 41mpbs and my upload is 31mpbs. Ping is 5.. Please help. =(
User was temporarily forum banned for this post.
|
2.8ghz i7, so last gen? You're going to need to OC that puppy if you want to stream at 1080p probably. I know Day[9] was running at a 4.0ghz OC when he was using a 920.
I'm no streaming expert, but I know even at 3.4ghz my i7 930 wasn't able to encode 1080p 30FPS raw Fraps output in the same amount of time as the length of the footage. I assume you need to be close to doing so.
Mind you, I was also using handbrake to encode, not sure how efficient or not it is. This is probably not super relevant, but it's the best I can give.
|
Do you think I would be able to stream 720p properly?
|
On June 25 2011 08:48 ReseT wrote: Do you think I would be able to stream 720p properly?
Not sure, tbh. I'd say just try different settings until you hit a good framerate/quality combination.
|
is there a specific reason why we should test it to California or you are just using the state as an example?
|
ya i got the same question. Is there specific reason why we should test it to California. I do live in Eastern Europe so CA is like on the other side of the planet and my down is 1.70 up 1.03... But to lets say London UK is ok-ish down 26, up 9.59
|
Hello,
I got a problem with VAC. I want to find a way to boost my microphone somewhat.
This is how I set it up: + Show Spoiler +
This is how it looks like in Skype (microphone is fine in there for some reason, notice the green bar as opposed to audio repeater) + Show Spoiler +
Anyone has any idea as for why the microphone is soooooo low (can barely, barely be heard on my stream)?
|
I have a dual 4.0ghz at the moment. Is the nature of the dual core such that it is very hard to stream? My graphics cards and other specs seem plenty high but lag is consistent. Should I consider upgrading to a quad?
User was warned for this post
|
|
i have a core 2 duo e7500 2.93Ghz, Geforce 9800GT, 3gb ram, and 0.5mb upload, i cant stream at all with Xsplit, i can't find a setup to make my stream ok, everybody says that xsplit is better than FME but i cant find the way to make it work, all the time im getting lag spikes, with FME i dont have this issue at all, but uses a lot of CPU, that's why im trying with xsplit but i think im gonna give up, is just, i tried a lot of setting, like video bitrate: 400, audio: from 32 to 96kbps, then preset faster. quality 10, frames from 20 to 30, and still having lag spikes...
|
|
You could try turning off hyper threading and OCing a bit. With "a bit" meaning shoot up to 3.6Ghz or so. Can do that at ~1.25 volts on my 930. Or try leaving HT on, but that can get kinda melty on temps. You got a decent cooler?
|
|
30% sounds incredibly low... Have you monitored temps and made sure you aren't being throttled for some reason? Power plan? Speedstep?
|
|
If you post in this thread asking for help you will be banned. R1CH
Do not post problems/ask for help in this thread.
|
On July 21 2011 15:57 HellGreen wrote:Do not post problems/ask for help in this thread. My bad- I'll remove them and start a fresh thread.
|
My proccesor is dual core 3.2 ghz will that be ok? 4g ram AMD gfx card
|
On July 21 2011 21:12 Superpower wrote: My proccesor is dual core 3.2 ghz will that be ok? 4g ram AMD gfx card
Generally, if there's a "Read this" sticky, you should read the OP. Your question is answered there. Just so you don't end up accidentally putting any effort into your problems, the answer is "no".
|
I'm trying to start streaming, I got it working with FMLE + VHScrCap and XSplit, but I'm wondering, is there any way to make VHScrCap or XSplit continue to capture the game window even if I alt+tab to another window?
I tried the select window on VHScrCap but it just captures the screen in the same resolution of the window I select, instead of only the window and nothing that is on top of it, and XSplit I only found options for capturing a part of the screen and not just one window.
User was temporarily forum banned for this post.
|
|
|
|