Sc2gears 14.3.3: Replay version 2.1 support - Page 125

On February 17 2012 21:56 aerique wrote:
Sc2gears doesn't seem to pick up my proxy settings. I've tried exporting _JAVA_OPTIONS='-Dhttp.proxyHost ... <jadajada>' and adding the -D options directly to the script but it doesn't work. The JVM says at startup "Picked up _JAVA_OPTIONS: -Dhttp.proxyHost=<ip> -Dhttp.proxyPort=<portnr>" but I still get a socket exception from Sc2gears:


This is on Linux.

On February 17 2012 22:26 Hairy wrote:
I have a small easy "fix/improvement" request, and a possible new feature that I think people will find useful!

"FIX": This is a minor issue, but just a little niggle I have. If I am searching through my replays and using replay filters ("ZvP metalopolis" etc), I will obtain a list of replays I am interested in. At the top right, in the status bar, I am told we are looking at "15/102 replays" (or something similar). However, if I hit 'Multi-Replay Analysis' I do not open a MRA of those 15 games, but instead I still open a MRA of all 102 replays. In order for me to do a MRA on just those 15 replays I need to select the replays I want, right click, and use the MRA option there.

Iny my opinion it would be easier and more intuitive for the 'Open in Multi-Replay Analysis' button to open only the FILTERED replays, not all of the replays.

----------------------------------------------
New feature idea:
"Rate of Mineral / Gas Consumption chart" (i.e. the MACRO graph!)

I envisage the chart would display the rate that minerals&gas is consumed by all sources; workers; units; upgrades; and new buildings. Spending sources could be ticked/unticked, which would allow players to examine specific areas of their play. For example, only ticking the 'workers' box would present a graph of the rate cash is being spent on new workers, allowing a player to identify areas where his worker production slipped. The "rate of" would be numbers over the last 30 seconds (60? tweak as necessary).

Protoss and Terran would expect (or hope, depending on your skill) to see stable worker production (a flat, horizontal line), with clear jumps up as you make additional command centres / nexus. The zerg worker production rates will obviously be more jumpy, but should still follow an overall steady increase for the early/mid part of a game. All races, assuming good macro, would hope to see graphs that display steadily increasing mineral&gas consumption rates until we have reached the mid/lategame. At this point we would hope to see the spending graph plateau, as we maintain the same high level of spending throughout the remainder of the game. If your graph has dips in it, it means that there was a gap in your spending!

I think these charts would be extremely useful in highlighting periods where your macro has slipped, identifying gaps in worker production, or unit production; and lategame it would be obvious if you are not taking additional bases quickly enough as the graph would start to decline as your income (and therefore your spending) decreases. Plus, it is something that is useable by all races. You could even plot your rates against your opponents' rates on the same graph!

-Hairy

On February 18 2012 11:22 Wroshe wrote:
Loving the program, only problem I have is that is doesn't seem to save my replay auto save folder.

I was at first using C:\Starcraft II - Replays and I am currently using C:\Users\Name\Documents\Starcraft II - Replays

The problem I have is that every time after I boot my system it is back at the C:\ one and I have to change it manually again. Is there any reason it does this and can I stop it?

On February 18 2012 16:33 Dakota_Fanning wrote:

Probably you don't save your settings.

By default settings are auto-saved on exit - when you close the program. I guess you don't close it manually.
Either close it, or perform a manual settings save: Settings menu => "Save settings now".

On February 19 2012 08:44 NExt wrote:
Hey sc2gears has a lot of great features.

I've looked around, FAQs, flicking throw the dropdowns, How Tos, and I can't seem to find a certain something which I hope sc2gears has, on top of all its great features.

Is there any way I can check my build order? e.g. 9 Pylon, 12, Gateway, 14 Gas etc.. etc.. There are timestamps on when I built a certain building, my actions on when I made stuff but its not the same.

Thx

On February 19 2012 14:15 Demonhunter04 wrote:
Hey guys is there any way to check worker production gap for Terran and Protoss? I thought it would be under the main building control tab in place of the injection gap, but that screen is just blank for T/P players.

On February 18 2012 01:10 Dakota_Fanning wrote:
Sc2gears has its own proxy configuration and settings.
Open the Misc settings dialog and go to the Internal tab. Check "Enable Proxy Configuration", and click on the "Proxy config" button...

On February 17 2012 22:26 Hairy wrote:
I have a small easy "fix/improvement" request, and a possible new feature that I think people will find useful!

"FIX": This is a minor issue, but just a little niggle I have. If I am searching through my replays and using replay filters ("ZvP metalopolis" etc), I will obtain a list of replays I am interested in. At the top right, in the status bar, I am told we are looking at "15/102 replays" (or something similar). However, if I hit 'Multi-Replay Analysis' I do not open a MRA of those 15 games, but instead I still open a MRA of all 102 replays. In order for me to do a MRA on just those 15 replays I need to select the replays I want, right click, and use the MRA option there.

Iny my opinion it would be easier and more intuitive for the 'Open in Multi-Replay Analysis' button to open only the FILTERED replays, not all of the replays.

...
-Hairy

On February 22 2012 22:03 Shade_CsT wrote:
Hi Dakota_Fanning, will SC2Gears show the EPM/APM in the On-Top APM display ? Since the last patch, the game can now read the two types of APM !

On February 22 2012 18:35 Dakota_Fanning wrote:

I just checked, this is not a bug, it works as you think it should be. If I filter reps, lets say the result is 50 out of 100 replays. If I press the "Multi-rep analysis" button, only the result 50 replays will be multi-analyzed.

On February 23 2012 00:46 Hairy wrote:

Well that's curious as it doesn't work as it should on mine, I just checked! I am using the most recent version of SC2Gears.


My replay search. I hit 'multi-replay analysis' (MRA) after this screenshot. Note that I have 34 games in my filtered search, and only ZvP games.



What I got. Note that I have a total of 87 replays in the MRA, and ZvZ and ZvT are both showing up (it should be ZvP only). Also note my horrible ZvT winratio.



What I SHOULD have got:



This also happens if I have replays selected and hit the Multi-Replay Analysis button. The only way I can get it to do a MRA using only filtered replays is to select the replays I want, right click, and use the MRA button in the right click menu.

On February 23 2012 01:09 Dakota_Fanning wrote:

There are 2 different things:
-Replay search
-Table filtering

I was referring to the replay search where on the "Search filters" tab you specify filters, you perform the search, and you get the results on the Results tab.
The "Multi-rep analysis" button analyzes the replays that were passed/presented on the Results tab. I think this is how it should work.

Table filtering only hides rows based on the criteria you provide.