|
On January 09 2011 07:32 apm66 wrote: streaming also depends on your internet connection, if you have a crappy connection, and trying to streaming HD, it will never happen Then there should be latency issues, this is not the case as its frame-rate dips
|
On January 09 2011 12:22 JoxxOr wrote:Show nested quote +On January 09 2011 07:32 apm66 wrote: streaming also depends on your internet connection, if you have a crappy connection, and trying to streaming HD, it will never happen Then there should be latency issues, this is not the case as its frame-rate dips
Ah. Well, I guess I'm having the exact same problem as OP. My fps drops from 90-100 to 10-25fps too once I go live with xsplit
EDIT: The following settings seemed to have fixed the fps drop for me. Now it sometimes drops down to 85fps, or doesn't drop at all.
- Channel: justin.tv ( ustream wasnt good for me ) - checked 'boost capture framerate' - unchecked 'optimized for motion picture' - res: 1088x612 (ws) - framerate: 20 - scale viewport: 10% (makes a huge diff) - Quality:5 , max bitrate: 350, buffer: 700
|
I have a friend who is having a similar problem. Under fraps the fps doesn't drop but everything stutters. As an example sometimes the drones will just skip. It only seems to happen in windowed mode but you can't really stream fullscreen. He had the same problem when using vidblaster so it doesn't seem application specific. His specs:
i7-960 3.2GHz ATI 5870 6GB RAM Win7 64-bit
Disabling optimize for motion picture also has no benefits. He streams at 640x400, quality 6, FPS 20. I have a much much worse PC than him and I can stream using XSplit with no fps drop/ stuttering. A solution would be great!
|
for me xsplit just records black screen when i click to starcraft =( very sad.
|
is there anyone with a radeon who doesn't have this problem? looking at the specs of the people here and adding myself with a radeon to that list, it might be radeon related.
Edit: So after taking a close look at SC2 without having anything running (no stream at all), I more or less come to the conclusion that the SC2 engine itself just seems to stutter if you take a too close look at it ... I will run a placebo test with dario and tell him the stream is running (when it isn't) and when I am pretty sure he will complain about it being not smooth.
|
I have a 5750 and have none of the problems described here. Although, my graphics settings are vastly lower than what my video card can handle (all medium). Also, don't know if it matters or not, but I have Vsync enabled. However, I'm fairly sure this is cpu related as opposed to gpu related. If you're having this problem, I think going through the SC2 graphics options and lowering the things that are cpu related should help.
|
|
|
What's your upload rate? Everyone says all these suggestions, but no one gives all the info.
On January 20 2011 19:36 TBO wrote: is there anyone with a radeon who doesn't have this problem? looking at the specs of the people here and adding myself with a radeon to that list, it might be radeon related.
Edit: So after taking a close look at SC2 without having anything running (no stream at all), I more or less come to the conclusion that the SC2 engine itself just seems to stutter if you take a too close look at it ... I will run a placebo test with dario and tell him the stream is running (when it isn't) and when I am pretty sure he will complain about it being not smooth.
It's not Radeon related. I have a 5850 and have helped a lot of people with equal or similar builds.
|
Reading through this thread, it seems like an i7 related problem. No one in this thread has an i5/AMD processor etc. Very strange.
|
I have an AMD and 5770 and I have this issue, so I kind of doubt it's i7 related.
|
U have to raise the max Bitrate, for the High Resolution Streaming ur Internet Upload speed has to be higher.
|
hi hi,
FYI
my issuse of having a black screen was because it wont record in full screen mode with xsplit, it does record on fullscreen (windowed) display... very very odd and annoying issue!!!
anyhoo, now i'll just work on getting a better internet connection.
hope that helps someone =)
|
bump. same problem.
scrolling looks really bad, as soon xsplit is opened.
core2quad q8300 @2.75ghz radeon 5700 4gb ram
any news? did anyone tried other broadcaster, like dyyno or something like that?
edit: i tested it with wirecast instead of xsplit, same problem :[
|
having this same issue using fme 2.5 + vhs + justin.tv
system i7-920, windows 7 64, 6gb ram, 2x ati 4890s, 60mbps/6mbps
im using settings from http://multiboxing.com/forums/f2/exact-way-stream-fme-jtv-read-1116.html and my ingame fps is high, stream looks fine, bitrate is set to 2000, but there's some weird stuttering problem. just having fme open causes it. it looks almost identical to what happens when i turn vsync on (whatever that means).
edit: 80% solved the stuttering by turning crossfire (sli) off and turning off ati's monitoring crap in the task manager (MOM.exe) but some still exists. i can't use the newer ati drivers to see if that fixes anything because obviously they cause sc2 mouse issues.
|
killing MOM.exe doesn't help :[
|
I have a sound issue with xsplit but I didnt want to make a new thread. People can hear people I talk to on skype but they cannot hear me, how can I fix this?
|
On February 28 2011 06:07 GreEny K wrote: I have a sound issue with xsplit but I didnt want to make a new thread. People can hear people I talk to on skype but they cannot hear me, how can I fix this?
What's your sound input set to? If its the generic system audio mix, you can set it to your microphone. XSplit automatically records the system sounds on its own without needing that to be set.
|
I get the same problem with:
q9550 @ 3.5ghz radeon 5770 4gb ram
all settings on sc2 are at low except textures, model and effects which are at their highest settings.
|
i have an amd phenom 955, and im streaming with xplit on justin.tv with 500mb bitrate and on ultra settings, oddly enough i see no problems lol
|
On February 28 2011 06:42 Vearo wrote:Show nested quote +On February 28 2011 06:07 GreEny K wrote: I have a sound issue with xsplit but I didnt want to make a new thread. People can hear people I talk to on skype but they cannot hear me, how can I fix this? What's your sound input set to? If its the generic system audio mix, you can set it to your microphone. XSplit automatically records the system sounds on its own without needing that to be set.
ohh that might be it... Also, would that have my mic on at all times? I don't want it to be constantly broadcasting my mic, only when I am talking to people on skype or ventrilo.
|
|
|
|
|
|