| Forum Index > BW General |
|
LarJarsE
United States1378 Posts
On November 12 2009 09:15 DaZe wrote: did we find any solution to this problem? I have the same thing...  We are still looking for a solution! I think someone should make a youtube vid showing EXACTLY how to do it with XP, and one with Vista. Then a star goes to that person  | ||
|
ToN
Canada245 Posts
edit: I want to make it very clear that in the stream of me settings things up that i inserted the wrong rtmp originally!!!! it should stay as mogulus and not livestream. I'm retarded and attempted changing it. Thanks! edit2: I just finished rerecording a mini tutorial on my stream at livestream.com/xtonx of how to install these things using vista and rage's guide. Hope it helps someone and if I epic failed anywhere please let me know ^^. | ||
|
RaptorX
Germany646 Posts
when I check the recorded file everything is perfect but the viewers say the sound goes behind or way ahead... | ||
|
konadora
Singapore66364 Posts
i really want to find out why my stream doesn't have unit sounds :< for sounds, i have Speakers and Realtek Digital Output for my 'Playback' tab, and Microphone, Line In (disabled), Realtek Digital Input, CD Audio and Stereo Mix for my 'Recording' tab. Currently, Stereo Mix is my default device. Under Audio for my camtasia recorder, the device is Stereo Mix (Realtek High Definition) and so is the device choice for my FMLE. When I go 'settings' for audio in FMLE, pin line input mix is enabled and under Pin Line, it's 'Master Volume'. | ||
|
RaptorX
Germany646 Posts
That might not fix it, but is a start where you can check. SoundCard: SoundBlaster Audigy Settings Recording tab: "What you Hear" Settings Playback: Microphone unmuted I can hear starcraft sounds + my microphone. My FMLE settings: + Show Spoiler + [Camtasia] Codec: x264 Lossless format [Camtasia] Codec special Setting: Interlaced checked [Camtasia] Resolution: 640x480 [FMLE] Codec: H.264 [FMLE] Codec Settings: Main - 3.1 - 5 seconds keyframe [FMLE] Frames Per Second: 15 [FMLE] Output Resolution: 560x420 [FMLE] Output Bitrate: 200Kbps [FMLE] Output Special Setting: Deinterlace checked [FMLE] Audio Codec: Mp3 [FMLE] Audio Channels: Mono [FMLE] Audio Hz: 44100 [FMLE] Audio Bitrate: 56Kbps *256Kbps* Name of the test record: ---[x264L 640x480]/H.264-[M]3.1[5]/15fps/560x420@200Kbps[interlace +deinterlace]/Mp3[M]22050Hz@56Kbps *256Kbps*--- My only problem is when going live, I am not sure because I havent tested enough but some people have told me that my audio goes behind or way ahead... I guess it has to do with the bitrate or something similar... when I see the recorded session my audio is perfect except for a constant glitch... the audio stops for a few milliseconds (almost unnoticeable but still annoying) every x seconds, sometimes it records perfectly some others it has the glitch, havent figure it out yet... My PC is a Core2Duo 2.5Ghz with 4GB ram and encoding takes 90% of the CPU I have a 15Mbps/1Mbps connection so I should be able to stream ok, can anybody recommend me settings? how about you kona, you stream perfectly how are your settings? | ||
|
Hirmu
Finland850 Posts
I have streamed before like 4months ago or so, but then i stopped it, until i started to stream again now, but my setting etc were so messed up with camtasia and abode that i needed to re-install them np yet, i got the stream going etc BUT my hotkeys (camtasia) arent working so my colors are messed up , any solution for this please? I have vista and camtasia 5.0.2. | ||
|
RaptorX
Germany646 Posts
| ||
RaGe
Belgium9950 Posts
On November 25 2009 18:23 RaptorX wrote: Thank you rage for making the tutorial! Everything is working great and I managed to get it running with a great quality! my specs: XP Core2Duo 2.50 Ghz 4Gb Ram Sound Blaster Audigy with the "What you hear" option on to pick up mic + starcraft sound... note that you have to unmute the mic on the playback panel so you can actually pick up the sound of the mic in your stream. ADSL 15,000 kbps Download 1,024 kbps upload Camtasia 5.02 FMLE 3.0 + Show Spoiler [Camtasia Settings] + ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/camsettings1.png) ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/camsettings2.png) ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/camsettings4.png) I am using x264 codec you can download it Here + Show Spoiler [x264 Settings] + ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/camsettings3.png) + Show Spoiler [FMLE Settings] + ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/fmlesettings1.png) ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/fmlesettings2.png) Now the interesting part... In FMLE I put some settings that my conection allowed, 350kbps as bandwidth can give great quality so you dont have to use the 500k if you dont want, specially if you cant. Note that you CANT change the name of the stream, if you change where it says "livestream" on the right side YOU WILL NOT GET IMAGE... at least I couldnt until i changed it to livestream again. I was using the x264 codec and it worked flawlessly I put the settings there as shown in the images... As you can see in the next images down there, if you see the little square with green color that is my CPU usage, you can see that is 100% right? yeah encoding takes a lot so... after you know that your channel is live close firefox, trust me it helps a lot. Also play with affinity and priority settings. I have FMLE in a separate core than starcraft and I have high priority in starcraft so it doesnt lag, I also have CPU Throttling on in starcraft and I disabled cycling colors or something like that on the video menu also in starcraft. When you start streaming the first cam will be zoomed in... that is normal and that is not the one that you will use. You will cue (If you dont have it done automatically) the other one that says "livestream" + Show Spoiler [Almost done] + ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/livestreamimages1.png) Note that you will not get image for a few seconds probably even 30 seconds... that is normal and still the other people can see your desktop even if you cant see it yourself there in livestream I confirmed that out. + Show Spoiler [Channel is Live!] + ![[image loading]](http://img.photobucket.com/albums/v234/raptor_x/TL%20Stream/livestreamimages2.png) In the last image you can see that livestream picked up my image and my channel is streaming live! Thanks A LOT. This kind of feedback really helps, people messing around with settings and posting them. I'm gonna include this in the main post. | ||
|
Hirmu
Finland850 Posts
On November 28 2009 00:07 RaptorX wrote: tools > options > hotkeys tab... if that doesnt work uninstall with a program like Revo Uninstaller that deletes EVERYTHING from your computer that has to do with that program and then you reinstall again. I think you got me all wrong, or maybe i just explained badly. I'm saying that my hotkeys aren't working while im in starcraft (f 9 start, f11 stop ) so thats why the colors are messed up all the time. | ||
|
RaptorX
Germany646 Posts
On November 28 2009 00:43 Hirmu wrote: I think you got me all wrong, or maybe i just explained badly. I'm saying that my hotkeys aren't working while im in starcraft (f 9 start, f11 stop ) so thats why the colors are messed up all the time. oh I see... did you try changing them to another hotkeys? I use F7 and F8 because they are closer together... if it still wont work my first suggestion is still valid, try uninstalling the program but try it with one of those uninstallers that actually takes care of all left over files on your PC like REVO or any other of that kind, since it can happen that some files are corrupted or misplaced. The other thing is that maybe you thought it is in F9 and F11 but you didnt notice that it has the Ctrl box checked or something similar. | ||
|
T.O.P.
Hong Kong4685 Posts
On November 25 2009 18:23 RaptorX wrote: Thank you rage for making the tutorial! Everything is working great and I managed to get it running with a great quality! my specs: XP Core2Duo 2.50 Ghz 4Gb Ram Sound Blaster Audigy with the "What you hear" option on to pick up mic + starcraft sound... note that you have to unmute the mic on the playback panel so you can actually pick up the sound of the mic in your stream. ADSL 15,000 kbps Download 1,024 kbps upload Camtasia 5.02 FMLE 3.0 + Show Spoiler [Camtasia Settings] + I am using x264 codec you can download it Here + Show Spoiler [x264 Settings] + + Show Spoiler [FMLE Settings] + Now the interesting part... In FMLE I put some settings that my conection allowed, 350kbps as bandwidth can give great quality so you dont have to use the 500k if you dont want, specially if you cant. Note that you CANT change the name of the stream, if you change where it says "livestream" on the right side YOU WILL NOT GET IMAGE... at least I couldnt until i changed it to livestream again. I was using the x264 codec and it worked flawlessly I put the settings there as shown in the images... As you can see in the next images down there, if you see the little square with green color that is my CPU usage, you can see that is 100% right? yeah encoding takes a lot so... after you know that your channel is live close firefox, trust me it helps a lot. Also play with affinity and priority settings. I have FMLE in a separate core than starcraft and I have high priority in starcraft so it doesnt lag, I also have CPU Throttling on in starcraft and I disabled cycling colors or something like that on the video menu also in starcraft. When you start streaming the first cam will be zoomed in... that is normal and that is not the one that you will use. You will cue (If you dont have it done automatically) the other one that says "livestream" + Show Spoiler [Almost done] + Note that you will not get image for a few seconds probably even 30 seconds... that is normal and still the other people can see your desktop even if you cant see it yourself there in livestream I confirmed that out. + Show Spoiler [Channel is Live!] + In the last image you can see that livestream picked up my image and my channel is streaming live! Lemme tell you guys a secret. Camtasia does not encode anything when you're in live output mode. Installing the x264 codec won't help at all. | ||
|
RaptorX
Germany646 Posts
On November 28 2009 13:19 T.O.P. wrote: Lemme tell you guys a secret. Camtasia does not encode anything when you're in live output mode. Installing the x264 codec won't help at all. If you dont install the x264 codec then you wont have the option in FMLE to encode in H.264 and the only codec you will have is the VP6 which in my case didnt work at all because it was dropping so many frames that it looked like it was taking a picture every 5 seconds... also the CPU required to encode in VP6 was much more than when I encode in x.264 but that can be just in my pc. | ||
|
T.O.P.
Hong Kong4685 Posts
On November 28 2009 22:14 RaptorX wrote: If you dont install the x264 codec then you wont have the option in FMLE to encode in H.264 and the only codec you will have is the VP6 which in my case didnt work at all because it was dropping so many frames that it looked like it was taking a picture every 5 seconds... also the CPU required to encode in VP6 was much more than when I encode in x.264 but that can be just in my pc. Even if you don't install x264, you get the h264 option. x264 != h264 h264 is the commercial version. x264 is the open source version. You can not install codecs to flash media live encoder. | ||
|
RaptorX
Germany646 Posts
On November 29 2009 12:20 T.O.P. wrote: Even if you don't install x264, you get the h264 option. x264 != h264 h264 is the commercial version. x264 is the open source version. You can not install codecs to flash media live encoder. :O didnt know that, and it is a shame because the h.264 only encodes to .f4v format, when you stream it to a file... :S | ||
|
Hirmu
Finland850 Posts
On November 28 2009 05:28 RaptorX wrote: oh I see... did you try changing them to another hotkeys? I use F7 and F8 because they are closer together... if it still wont work my first suggestion is still valid, try uninstalling the program but try it with one of those uninstallers that actually takes care of all left over files on your PC like REVO or any other of that kind, since it can happen that some files are corrupted or misplaced. The other thing is that maybe you thought it is in F9 and F11 but you didnt notice that it has the Ctrl box checked or something similar. Thanks! This helped me to solve the problem, i changed the hotkeys ,but still hotkeys didnt work so i tried to put ctrl on the game and then it worked ! thanks | ||
|
gorchiza
Bulgaria200 Posts
I made all the things and everything is working. But i have one question. The stream is great in the site but its a little bit laggy in the game and i am not sure that in iccup it will be good if there is lag for me. Which setting i should lower to improve the quality of play int he game ? Thanks in advance ! | ||
|
RaptorX
Germany646 Posts
On November 29 2009 22:08 gorchiza wrote: thanx for the wonderful thread !!! I made all the things and everything is working. But i have one question. The stream is great in the site but its a little bit laggy in the game and i am not sure that in iccup it will be good if there is lag for me. Which setting i should lower to improve the quality of play int he game ? Thanks in advance ! download THIS program, is called Prio and what it does is that it saves the priority of tasks and affinity... what does priority and affinity of a program mean? + Show Spoiler [Answer. In case you didnt know:] + Windows have the ability to prioritize certain processes over others, to do that you press Ctrl + Alt + Delete and look for the name of the process, right click on it and in priority you put it on high (dont ever put anything in realtime if you dont have a good processor). The problem is that windows dont save those settings, so every time you open the program you would have to go and set the priority. That program that I told you about saves the settings so you dont have to do it over and over again. The affinity is in which core you want that that program runs (if you have more than one core of course). To change that, you do the same as before but instead of priority you go to affinity and select the core or cores you want that program running on. I noticed that Prio also saves that even though they dont mention it.... or probably I am doing that i dont know :D Here is what you have to do. First keep Starcraft and FMLE in separate cores, I have SC in core 0 and FMLE in core 1. Put Starcraft as High Priority and set FMLE to above normal priority. I also have camtasia in above normal. And if you have Prio those settings are going to be retained every time you start those programs. Cool right? with that you should get almost no lag or no lag at all depending on your CPU speed and your RAM. If you cant save the affinity with prio try imagecfg gui. I would be careful with that last program because it modifies the exe file, so if you use it make a backup copy of your exe before you modify it. | ||
|
gorchiza
Bulgaria200 Posts
| ||
|
Armathai
1023 Posts
| ||
|
RaGe
Belgium9950 Posts
On December 01 2009 23:25 Armathai wrote: Thanks for the guide, i had super trouble trying to set it up with Camtasia 5 and finally went and found a copy of 4. No problems after that, except that one of your screens for FMLE shows bitrate for 650 which is beyond what unverified users can use. However after solving these small issues its all working great! Thanks a bunch. Yeah, when I made the guide livestream had no max bitrate. | ||
| ||
StarCraft 2 StarCraft: Brood War Dota 2 League of Legends Counter-Strike Super Smash Bros Heroes of the Storm Other Games |
|
Sparkling Tuna Cup
WardiTV Invitational
ByuN vs Percival
Cure vs Classic
Shopify Rebellion Sundays
Spirit vs Mixu
Clem vs TBD
RSL Revival
Serral vs Rogue
BlizzCon
IdrA vs MC
Replay Cast
Afreeca Starleague
Light vs JyJ
Soulkey vs hero
WardiTV Weekly
Monday Night Weeklies
Afreeca Starleague
Snow vs Shinee
Shine vs EffOrt
[ Show More ] |
|
|
EPT
