| Forum Index > BW General |
|
NeV
Italy370 Posts
On June 17 2009 08:33 RaGe wrote: Have u tried playing with CPU throttling enabled? Also, try setting CPU affinity for SC BW and FMLE to a different CPU (core). sry for the noob question, but how do i enable CPU throttling ? I have looked in ingame options > speed, like i read somewhere, but there isn't anything like that.. | ||
RaGe
Belgium9950 Posts
On June 20 2009 01:15 NeV wrote: sry for the noob question, but how do i enable CPU throttling ? I have looked in ingame options > speed, like i read somewhere, but there isn't anything like that.. Do you have the latest StarCraft version? It was only added in the last version. It's at the bottom of the speed options. There's really no way it isn't there. | ||
|
Masq
Canada1792 Posts
I've read it, and followed it to the T multiple times. Still doesn't work. | ||
|
Louder
United States2276 Posts
1. In the device priority, set the computer you're streaming from as highest priority. Put it's device name and it's MAC address. To find the MAC address, go to start->run, type cmd, then type ipconfig /all in the command prompt. Your MAC will be displayed in there. 2. If you're connected on ethernet as you should be, figure out which port you're plugged into and set that port's priority to high. 3. In application priority, add the following: bw1 highest 6112 bw2 highest 4000 rmtp highest 1935 This helped me a LOT. | ||
|
RaGe
Belgium9950 Posts
On June 20 2009 02:54 GG.Win wrote: I've read it, and followed it to the T multiple times. Still doesn't work. I meant try reading not only the opening post. Your 'problem' is without a doubt the most discussed 'problem' and even addressed in my opening post. | ||
|
NeV
Italy370 Posts
"Unfortunately, we cannot approve your application at this time, due to the following issues: Unclear permissions: We cannot verify that you have the permissions / license to broadcast the content currently available on your channel. If you do have a license, please email verification@livestream.com with further evidence. The Livestream Team" Anybody else having the same problem? Any tips to make them accept my request? | ||
|
Durak
Canada3685 Posts
I suppose I could try reinstalling Camtasia and see if that helps. Any other ideas? Obviously the Camtasia Studio Video Capture Driver should still be installed. Edit: I reinstalled Camtasia as well as Adobe live encoder and it seems all right. | ||
|
RaGe
Belgium9950 Posts
On June 23 2009 07:49 NeV wrote: i've made a personal channel but i can't make it verified for some reason. I have already tried 3 times and the last one they sent me this email: "Unfortunately, we cannot approve your application at this time, due to the following issues: Unclear permissions: We cannot verify that you have the permissions / license to broadcast the content currently available on your channel. If you do have a license, please email verification@livestream.com with further evidence. The Livestream Team" Anybody else having the same problem? Any tips to make them accept my request? Just include a statement that you're not broadcasting copyrighted VODs and that Blizzard allows games to be shown without a license if you it's not for commercial purposes. | ||
|
Saafen
Sweden79 Posts
Edit: Hmm. Maybe I should have tryed it with Starcraft before I wrote the comment. Its not possible to use "Game" option. BW seems to be to old or somthing. And if recording "Screen" BW is in all black. So the old way with Media Decoder is still the best way for BW. But ProCaster works perfect with new games and dekstop. | ||
|
Durak
Canada3685 Posts
| ||
|
astrL
France1 Post
ok it is fine know donno why oO lol | ||
|
TerlfY
Finland121 Posts
On June 27 2009 06:26 Durak wrote: I'm wondering if anyone can get their SC not to lag while recording with Camtasia. I have an e8400 so I figure that it should be able to handle it but my SC lags. I have CPU throttling enabled, SC set to realtime priority, and camtasia set to high priority. My comp lagged pretty bad too. But after reboot recording worked smoothly. o.o | ||
|
theqat
United States2856 Posts
| ||
|
RaGe
Belgium9950 Posts
On June 27 2009 06:26 Durak wrote: I'm wondering if anyone can get their SC not to lag while recording with Camtasia. I have an e8400 so I figure that it should be able to handle it but my SC lags. I have CPU throttling enabled, SC set to realtime priority, and camtasia set to high priority. A lot of people with really good computers have lag issues. I don't understand how it happens or what is causing it. Try playing around with core affinities? Giving SC its own Core, or sharing that core with camtasia or sharing it with fmle. Also try other codecs in FMLE (other than VP6) and see how it affects your cpu usage. If you find a solution, please do tell. | ||
|
T.O.P.
Hong Kong4685 Posts
I downloaded the x264vfw codec online and selected that as my video codec option in the live output window in Camtasia. I capture at 15fps. In Flash Media encoder, I select H264 as my video codec with settings of 480*360, 436 kb/s, and 15fps. For audio I select mp3 at 64kb/s. Combined, that's a total of 500kb/s, which is the maximum bitrate that Mogulus accepts. I use a desktop with a e7200 processor (overclocked to 3.2 Ghz) and a ATI 2600xt graphic card. I also selected the option of "keep aspect ratio" in the image scaling window of the ATI Catalyst Control Center. When you capture with the x264 codec instead of the techsmith codec, your computer runs smoother and your video looks smoother in Mogulus. I still have starcraft as high priority in Task Manager though. edit: it works on my laptop too. Core 2 Duo (2.0Ghz) Nvidia 9600GT | ||
|
TuFFeR
Sweden30 Posts
On June 29 2009 11:54 T.O.P. wrote: I got good results (no lag) by capturing with the x264 codec in Camtasia. I downloaded the x264vfw codec online and selected that as my video codec option in the live output window in Camtasia. I capture at 15fps. In Flash Media encoder, I select H264 as my video codec with settings of 480*360, 436 kb/s, and 15fps. For audio I select mp3 at 64kb/s. Combined, that's a total of 500kb/s, which is the maximum bitrate that Mogulus accepts. I use a desktop with a e7200 processor (overclocked to 3.2 Ghz) and a ATI 2600xt graphic card. I also selected the option of "keep aspect ratio" in the image scaling window of the ATI Catalyst Control Center. When you capture with the x264 codec instead of the techsmith codec, your computer runs smoother and your video looks smoother in Mogulus. I still have starcraft as high priority in Task Manager though. edit: it works on my laptop too. Core 2 Duo (2.0Ghz) Nvidia 9600GT Did you have the cursor/game lagg before you updated to that codec? And if so, did you do any special settings in the codec? Ps. What camtasia version do you use? DS: | ||
|
GuineaPigz
Netherlands1 Post
Does anyone know whats causing this or a solution for it? | ||
|
T.O.P.
Hong Kong4685 Posts
On July 01 2009 04:59 TuFFeR wrote: Did you have the cursor/game lagg before you updated to that codec? And if so, did you do any special settings in the codec? Ps. What camtasia version do you use? DS: The cursor doesn't lag as long as starcraft has a higher priority than Camtasia and Flash Live Media Encoder in Task Manager. I use Camtasia version 5.0.2. I downloaded x264vfw and I use the settings "Single pass - quantizer based (26)". If you're low on CPU power, you could download XVID and do the same thing. | ||
|
reachfortherings
63 Posts
| ||
|
NoHandicap
Bulgaria4 Posts
| ||
| ||
StarCraft 2 StarCraft: Brood War Dota 2 League of Legends Counter-Strike Super Smash Bros Heroes of the Storm Other Games |
|
Sparkling Tuna Cup
WardiTV Invitational
ByuN vs Percival
Cure vs Classic
Shopify Rebellion Sundays
Spirit vs Mixu
Clem vs TBD
RSL Revival
Serral vs Rogue
BlizzCon
IdrA vs MC
Replay Cast
Afreeca Starleague
Light vs JyJ
Soulkey vs hero
WardiTV Weekly
Monday Night Weeklies
Afreeca Starleague
Snow vs Shinee
Shine vs EffOrt
[ Show More ] |
|
|
EPT
