EPTMy current settings are as follows:
Quality: 8
CPU Preset: Veryfast
Max bitrate: 1500
Buffer size: 1500
Any help would be appreciated! Thanks.
[G] Streaming with OBS (Open Broadcaster Software) - Page 4
| Forum Index > Tech Support |
|
Sovano
United States1503 Posts
My current settings are as follows: Quality: 8 CPU Preset: Veryfast Max bitrate: 1500 Buffer size: 1500 Any help would be appreciated! Thanks. | ||
|
JohnJohnson
United States49 Posts
I can't stand how sc2 runs in windowed mode. Runs absolutely flawless in regular fullscreen, even on ultra. As soon as I go into windowed fullscreen though, the only way to get even close to tolerable, is to drop all settings to low... even then, there's still a several millisecond delay on everythinggggg I do. I have no idea how you guys tolerate it. I guess my specs are just a tad too low. | ||
|
obs.Jim
United States101 Posts
Sovano - Laptops aren't always as smooth as desktops, but your laptop seems like a pretty good one. So I don't know whether it's your system or not. Also, if you're not using window capture, it's a little better than monitor capture in terms of FPS rates, so if you're not using it, try it out and see if that helps to improve framerates. JohnJohnson - I don't know if this will help, but try turning off or disabling aero (if it's not already). Aero presents some GPU overhead and could cause problems for windowed games on some GPUs. Your specs aren't the latest, but they shouldn't be that bad. | ||
|
SpyNinja
United States78 Posts
On October 02 2012 13:51 obs.Jim wrote: Strange, I'm not modifying the webcam output or anything, so there shouldn't be any issues. Any possibility that you could try hitting the configure button when the device is selected? Usually, there are things like brightness settings and such you can modify in there. http://i.imgur.com/5kgo4.jpg for an example of what I mean yeah I tried that. No matter what the image is super super dark.. Everything fine on xsplit tho I don't get it. Program works really great for me minus that tho >< | ||
|
obs.Jim
United States101 Posts
Do you happen to be using the 64bit version? (If on windows 64bit, the installer automatically installs 64bit). As r1ch said, certain devices may have issues on 64bit, so I would love to know if replacing your binaries with the 32bit version (which you can find on the website) would have any effect on your device output. The whole 64bit by default thing is my fault - going to make 64bit optional in later updates from now on. I apologize for asking you to do this, but the testing would greatly help me (and potentially others) out if you could see if this helps. | ||
|
SC_RainbowDash
Denmark33 Posts
| ||
|
Sovano
United States1503 Posts
On October 02 2012 15:26 obs.Jim wrote: First, I'd like to clarify the 60fps thing with software capture. The FPS option in the settings allows you to set the target FPS. When using software capture, it doesn't necessarily mean that you will get that FPS. There are indeed many people getting 60fps with software capture, but it usually depends on their system. In a version or two I will display capture FPS so you can see what you're actually getting - sorry about the delay on that feature. Sovano - Laptops aren't always as smooth as desktops, but your laptop seems like a pretty good one. So I don't know whether it's your system or not. Also, if you're not using window capture, it's a little better than monitor capture in terms of FPS rates, so if you're not using it, try it out and see if that helps to improve framerates. JohnJohnson - I don't know if this will help, but try turning off or disabling aero (if it's not already). Aero presents some GPU overhead and could cause problems for windowed games on some GPUs. Your specs aren't the latest, but they shouldn't be that bad. Hi thanks for the reply. I tinkered around with the settings and lowered my monitor resolution from 1920x1080 to 1366x768 and I've noticed quite a difference. However I can say its probably floating around 30 FPS at decent quality. Perhaps my laptop is not powerful enough to achieve 60 FPS or I haven't found the right settings yet. Either way I'm looking forward to the upcoming versions! This is an absolutely amazing program. | ||
|
obs.Jim
United States101 Posts
| ||
|
SC_RainbowDash
Denmark33 Posts
+ Show Spoiler + ![[image loading]](http://i.imgur.com/n13Zb.png) | ||
|
SpyNinja
United States78 Posts
On October 02 2012 17:29 obs.Jim wrote: I'll see what I can do on getting some additional options in for adjusting brightness and such in future updates for cases like these. Do you happen to be using the 64bit version? (If on windows 64bit, the installer automatically installs 64bit). As r1ch said, certain devices may have issues on 64bit, so I would love to know if replacing your binaries with the 32bit version (which you can find on the website) would have any effect on your device output. The whole 64bit by default thing is my fault - going to make 64bit optional in later updates from now on. I apologize for asking you to do this, but the testing would greatly help me (and potentially others) out if you could see if this helps. hmm the 32 seems to be working better >< | ||
|
Bourne
United Kingdom152 Posts
Other than that i love the ability to add screen regions and programs as separate scenes, i can alt tab out of sc2 without any other third party programs, but the auto scene one for this would be awesome! | ||
|
obs.Jim
United States101 Posts
Did you update your avermedia firmware at all recently? I've heard reports that some of the new firmware has been causing problems for some people, not entirely sure. I may have to update my firmware and check to see if I get the same thing, and fix it if possible. Also, try using the 32bit version of my app if not already and see if that changes anything if possible | ||
|
SC_RainbowDash
Denmark33 Posts
the dropbox for resolutions are just empty | ||
|
obs.Jim
United States101 Posts
Bourne - what specifically are you trying to crop? | ||
|
Bourne
United Kingdom152 Posts
| ||
|
obs.Jim
United States101 Posts
| ||
|
SC_RainbowDash
Denmark33 Posts
| ||
|
obs.Jim
United States101 Posts
| ||
|
SC_RainbowDash
Denmark33 Posts
 appreciate it. | ||
|
Scorevath
United States43 Posts
I'm currently running the 64 bit version and having some issues with hotkeys. I have set them up but when i press them the scene doesn't change. I just extracted the binary zip to a folder on my desktop. Do I need to run the installer for the hotkeys to work? In addition, is there any intention to add a text source in the near future? Overall I love it. Definitely switching from Xsplit. | ||
| ||
