| Forum Index > Tech Support |
|
Doler
United States206 Posts
I just got my new pc, i5-2500k cpu, and GTX 550 Ti SC vga, with this mobo: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157230&Tpk=asrock p67 pro3 b3 The problem is that the pc boots very slow. It takes 51sec till POST, and then around 7sec till windows password screen. I've tryed to google some, but didn't get good answers. Anyone knows what's up? | ||
|
skyR
Canada13817 Posts
| ||
|
Doler
United States206 Posts
Edit: #1 priority is now set at my HD instead of the DVD, and I've disabled the splash, still the same  Is it normal that it boots so slow? | ||
|
BetaWolf
United States39 Posts
On July 24 2011 17:58 Doler wrote: Why would I have to clear the CMOS? I just bought the pc ... Edit: #1 priority is now set at my HD instead of the DVD, and I've disabled the splash, still the same Is it normal that it boots so slow?I have the exact same mobo and mine doesn't boot that slow. | ||
|
Doko
Argentina1737 Posts
| ||
|
skyR
Canada13817 Posts
You clear the CMOS in this scenario because it clears the DMI pool which may or may not solve your issue of slow booting... Is your SATA set to AHCI? | ||
|
Doler
United States206 Posts
Not sure if I have done it right though, I just went restore default settings, which is the way to do it right?On July 24 2011 19:24 skyR wrote: All the SATA ports on the Asrock P67 is provided by the Intel chipset. Disabling USB3 is worth a try. You clear the CMOS in this scenario because it clears the DMI pool which may or may not solve your issue of slow booting... Is your SATA set to AHCI? I don't know | ||
|
Sathiroth
Australia93 Posts
On July 24 2011 19:43 Doler wrote: Ok I've disabled the USB3.0, didn't work. Cleared the CMOS didn't work either Not sure if I have done it right though, I just went restore default settings, which is the way to do it right?Yes that’s the right, but to be absolutely sure place the CMOS pin on clearing position **NOTE** your clear CMOS is located directly near your bios battery. -Turn off the PC -Remove the power cable -Then press the power on button to remove any charge left -Place the CMOS pin to reset position OR remove the bios battery -Leave it on for 5-15 secs OR leave the battery removed for 5-15 secs -Press power on button -Place the clear CMOS pin back to its original position OR put the bios battery back in -Plug the power cable back in -Turn on, then go into the bios and do a 'reset to default' | ||
|
Doler
United States206 Posts
There must be something wrong | ||
|
sakula1g
1 Post
| ||
|
JusticiTy
Germany17 Posts
| ||
| ||
StarCraft 2 StarCraft: Brood War Dota 2 League of Legends Other Games Organizations Counter-Strike Other Games StarCraft: Brood War StarCraft 2 StarCraft: Brood War |
|
RSL Revival
Maru vs MaxPax
BSL
RSL Revival
Cure vs Rogue
uThermal 2v2 Circuit
BSL
Afreeca Starleague
Wardi Open
Replay Cast
Sparkling Tuna Cup
Kung Fu Cup
[ Show More ] |
|
|
EPT
