EPTSimple Questions Simple Answers - Page 625
| Forum Index > Tech Support |
|
R1CH
Netherlands10343 Posts
| ||
|
Craton
United States17303 Posts
Might still need a plug adapter, though. Doesn't sound like the 3 prong ones are very common in Japan. | ||
|
Dingodile
4139 Posts
edit: I think sites are solved, except twitch. latency to broadcaster/encoder about 50sec and puffer is always about 5-0 sec. video and audio are stagnating if puffer is on 0sec on any resolutions. Youtube works flawlessy on 720p. edit: same time, maybe I am 1min ahead. | ||
|
FFGenerations
7088 Posts
 check your computer clock dingodile if you have internet issues sometimes | ||
|
zev318
Canada4306 Posts
| ||
|
Introvert
United States5065 Posts
| ||
|
R1CH
Netherlands10343 Posts
On March 04 2018 02:24 zev318 wrote: can anyone recommend a good power bank or a good brand? want to get one for my pixel 2 Anker make the best stuff. Watch out for counterfeits though. | ||
|
phosphorylation
United States2935 Posts
My computer works fine with a different graphics card (a beater 8600gt or something). My power supply is Corsair TX650W (bronze I think). When I plug in the Vega, the card fans spins for around 10 seconds and the fans stop after that, although the XFX graphics card lights are still on. I get no display. I suppose there are three distinct possibilities. 1) The card is defective (will try to verify this in a few days with a different computer elsewhere). 2) The PSU is under-powered/defective. It works fine with 8600 gt and a I5 2500K system, but adding a power hungry Vega is too much? 3)There is something wrong with the mobo bios settings (or perhaps drivers?) that is preventing sufficient juice to be delivered to the cards. Perhaps, cutting off the power because of power saving? I did try to reset the mobo bios setting by unseating the CMOS battery. My question would be: which scenario is most likely? And, how would I check/fix for scenario 3? Thanks for the help | ||
|
HornyHerring
Papua New Guinea1059 Posts
https://uk.pcpartpicker.com/list/LHjFTB I've got a case already, this will be mainly to play some games casually (not cutting edge), video rendering, photoshop/lightroom and running some VM's for dev work. HDDs are meant to go to RAID1 and I've got the case already. | ||
|
FFGenerations
7088 Posts
1080 is for a 4k setup, right? so you'll want a 4k screen (+120hz??) on top of that also what about this thundersomething usb port option or usb port c or whatever it is | ||
|
Craton
United States17303 Posts
| ||
|
mantequilla
Turkey781 Posts
| ||
|
elijahsmith
1 Post
| ||
|
annamolly
1 Post
| ||
Teoita
Italy12248 Posts
The specs are the following: Intel i5-8600K CPU Gigabyte Z370 HD3 motherboard MSI GeForce GTX 1050 Ti 4GB GPU 2xVengeance LPX 4GB DDR4 RAM Silent Base 600 case Seasonic S12 II Bronze 620W PSU SK Hynix SL30D SSD Noctua NH-U12S cooler. We tried the following, none of which made any difference: 1) Change mobo standoffs 2) Rebuild the PC multiple times to ensure that cables are plugged in correctly 3) Boot without the GPU using the internal card on the mobo 4) Boot using only one RAM stick, set in different slots 5) Clear the BIOS by shorting the CMOS jumper 6) Remove the CPU cooler, re-apply thermal paste, ensure no thermal paste was anywhere but on the CPU Anyway have any ideas? | ||
|
OsaX Nymloth
Poland3244 Posts
| ||
|
Teoita
Italy12248 Posts
 I figured if it was the PSU taking the 1050 off should make it work fine; I guess I can try pulling the one from my own desktop but yea that seems unlikely to me as well. | ||
|
OsaX Nymloth
Poland3244 Posts
Good luck and let me know what solution you went with. | ||
|
Simberto
Germany12066 Posts
If i recall correctly, that sometimes gives you evidence as to whether the CPU + Motherboard is working or not. In my case there are different beepcodes. | ||
|
Craton
United States17303 Posts
| ||
| ||
