|
On April 27 2013 14:55 Excalibur_Z wrote:Show nested quote +On April 27 2013 01:39 korona wrote:On April 27 2013 01:17 Zuricko wrote:
So, for most games I play it is filling in a "player assumption" instead of a win/loss. I have the memory scanner activated and all that. Only 2 of the 29 games I have on this so far are filled in as losses, while there are also only 2 out of 29 wins. Everything else is player assumption. The trend is similar for my opponents as well. Does anyone know why this is happening? I just updated to 4.2, all the game data I have so far was on 4.1 though. Any thoughts? Cap detection was fixed to correspond the current cap mechanics. You likely are consistently in cap area where the MMR often cannot be calculated from the opponent's data. What's the new minimum you're operating with now, and what's the Master minimum?
For non-masters the cap behaved similarly for wins as the did in old Not_that's research. For losses there was differences. Old cap min borders were used (inverse values): http://postimg.org/image/8bny2acav/
For masters the values are rough and work-in progress, but seem good enough at the moment. Gave more detailed answer as PM.
|
|
|
Hi guys, does MMR Stats work on 2s 3s 4s team play? i played many games, but nothing got picked up. Thanks
|
i'v been playing many games and mmr stats won't pick up anything. I have it on but still says 'need a better game 0/0 '. I downloaded from the mirror.
here is what it says when starting up.
16:35:32 MMR-Stats 9.2
16:35:32 --------INIT START--------
16:35:32 OK Sc2Gears auto-save is enabled.
16:35:32 OK Encoding: OK
16:35:32 ERROR No DB found
16:35:32 Downloading new DB File...
16:35:53 FATALERROR Datahandler: failed to download new Database file
16:35:53 FATALERROR Loading DB failed
16:35:53 FATALERROR fall back to emergency DB / OUTDATED!
16:35:53 Loading character profiles:
16:35:53 Profile: http://us.battle.net/sc2/not going to show my profile/
16:35:53 OK Settings loaded!
16:35:53 OK Gamedata: 0 Games loaded.
16:35:53 Loading Archive... 16:35:53 No Data Found!
16:35:53 Memory scanner is enabled
16:35:53 OK Triggers ready!
16:35:53 OK Timeclient: Systemtime offset: -2 sec
|
|
|
sorry if this is a stupid question, but will the MMR analyzer only start working after I've played a few games? I just installed sc2gears hoping to get the MMR thingy, but it says I don't have enough games to analyze it. Is there a setting within sc2 gears that I need to enable in before I go and play another game or it to be recognized? (not going to play sc for about half a day, guess i could always just trial/error tomorrow).
|
On April 28 2013 06:34 Tpad wrote:i'v been playing many games and mmr stats won't pick up anything. I have it on but still says 'need a better game 0/0 '. I downloaded from the mirror. here is what it says when starting up. 16:35:32 MMR-Stats 9.2 16:35:32 --------INIT START-------- 16:35:32 OK Sc2Gears auto-save is enabled. 16:35:32 OK Encoding: OK 16:35:32 ERROR No DB found 16:35:32 Downloading new DB File... 16:35:53 FATALERROR Datahandler: failed to download new Database file 16:35:53 FATALERROR Loading DB failed 16:35:53 FATALERROR fall back to emergency DB / OUTDATED! 16:35:53 Loading character profiles: 16:35:53 Profile: http://us.battle.net/sc2/not going to show my profile/ 16:35:53 OK Settings loaded! 16:35:53 OK Gamedata: 0 Games loaded. 16:35:53 Loading Archive... 16:35:53 No Data Found! 16:35:53 Memory scanner is enabled 16:35:53 OK Triggers ready! 16:35:53 OK Timeclient: Systemtime offset: -2 sec
First it is obvious why it cannot download the DB file as it is located at the same server as the update file. And as you downloaded the tool from the mirror you likely cannot reach that server.
But there is something wrong with your settings if no games are recorded. Based on the data you gave I can only speculate couple reasons: 1) you don't have write rights under sc2sgears subfolders so the data cannot be stored or 2) you play with a character you have not configured to the tool or 3) you have missconfigured sc2gears replay auto-save and nothing is actually autosaved. Because when sc2gears auto-saves a replay it activates MMR plugin to record data for that match. Remember also that only 1v1 ladder games are supported.
On April 28 2013 21:40 Sir.Phalanx wrote:
sorry if this is a stupid question, but will the MMR analyzer only start working after I've played a few games? I just installed sc2gears hoping to get the MMR thingy, but it says I don't have enough games to analyze it. Is there a setting within sc2 gears that I need to enable in before I go and play another game or it to be recognized? (not going to play sc for about half a day, guess i could always just trial/error tomorrow).
It starts working from first game you record. But there are lots of requirements for the match data that have to be met to be able to calculate MMR from it. --> It may take several matches to record a match from which your MMR can be calculated.
|
15: 7 : 29 Game Start detected
15: 7:29 Searching memory for character profiles for game HotS
15: 7: 32 Reading Memory ...OK
15: 7: 32 Ramscanner: name1 : Tpad
15: 7: 32 Ramscanner: id1 : 1-3533907
15: 7: 32 Ramscanner: name2 : MikeyBoy
15: 7: 32 Ramscanner: id2 : 1-4628605
15: 7: 32 OK Found Memory-Profile in Active-Profiles!
15:8:12 Pre-trigger: Reading web profiles
15:8:18 Webgrabber: Player true
15:8:24 Webgrabber: Opponent true
15:8:24 Pre-trigger: Done reading web profiles
15:19:13 Post-trigger: Reading web profiles
15:19:19 Webgrabber: Player true
15:19:24 Webgrabber: Opponent true
15:19:24 Post-trigger: Done reading web profiles
15:20:20 Pre-Trigger thread: Waiting Post-Trigger lock to open
15:21:20 Pre-Trigger thread: Post-Trigger lock on. Giving up after 60 seconds
15:31:59 Post-trigger: Reading web profiles
15:32:5 Webgrabber: Player true
15:32: 9 Webgrabber: Opponent true
15:32: 9 Post-trigger: Done reading web profiles
this is what is says after I finish a game. It just stays here blinking post-trigger running in the corner never ending.
|
There's a typo in one of your errors:
22:1:27 ERROR LASTCHECK :WEBSERVER update failed, Diffrent Mapname
|
The website is not accessible and my MMR is not being calculated no matter how many games I play.
|
20:52:43 --------------------------
20:52:43 Game Start detected
20:52:43 Searching memory for character profiles for game HotS
20:52:43 Reading Memory ...OK
20:52:43 OK Found Memory-Profile in Active-Profiles!
20:53:23 Pre-trigger: Reading web profiles
20:53:27 Webgrabber: Player false
20:53:31 Webgrabber: Opponent true
20:53:31 Pre-trigger: Done reading web profiles
20:53:31 Pre-Trigger done
21:6:43 --------------------------
|
My MMR Stats is not working so far. 
|
Ladder is locked, therefore MMR Stats should be locked as well, probably why. Wait until the new season starts.
|
On April 29 2013 14:29 Chillyo wrote:
Ladder is locked, therefore MMR Stats should be locked as well, probably why. Wait until the new season starts.
Leagues are locked, but points and MMR can still move.
|
make sure you have memory reader active so you can get a good game. Also make sure you keep sc2gears open while you'r playing the games.
|
On April 29 2013 05:34 Tpad wrote:
15: 7 : 29 Game Start detected
15: 7:29 Searching memory for character profiles for game HotS
15: 7: 32 Reading Memory ...OK
15: 7: 32 Ramscanner: name1 : Tpad
15: 7: 32 Ramscanner: id1 : 1-3533907
15: 7: 32 Ramscanner: name2 : MikeyBoy
15: 7: 32 Ramscanner: id2 : 1-4628605
15: 7: 32 OK Found Memory-Profile in Active-Profiles!
15:8:12 Pre-trigger: Reading web profiles
15:8:18 Webgrabber: Player true
15:8:24 Webgrabber: Opponent true
15:8:24 Pre-trigger: Done reading web profiles
15:19:13 Post-trigger: Reading web profiles
15:19:19 Webgrabber: Player true
15:19:24 Webgrabber: Opponent true
15:19:24 Post-trigger: Done reading web profiles
15:20:20 Pre-Trigger thread: Waiting Post-Trigger lock to open
15:21:20 Pre-Trigger thread: Post-Trigger lock on. Giving up after 60 seconds
15:31:59 Post-trigger: Reading web profiles
15:32:5 Webgrabber: Player true
15:32: 9 Webgrabber: Opponent true
15:32: 9 Post-trigger: Done reading web profiles
this is what is says after I finish a game. It just stays here blinking post-trigger running in the corner never ending.
On April 29 2013 06:59 NeutraLiTe wrote:
The website is not accessible and my MMR is not being calculated no matter how many games I play.
These 2 are likely caused some bug regarding that there is no DB file available and you don't reach the website due to some problems with your ISP or something. When I did the conversion I did not change parts of the code that use backup DB. I did test that part when made the conversion, but I have always had access to the website, so it always automatically downloaded a new file. Will have to test this later, but will not mirror the DB file now as in few days new file will be released as new season begins.
Wonder how widespread the problem of not reaching the website is. All but 1 users reporting this in this thread claim to be from US. One was from Mexico.
On April 29 2013 06:02 Kreeeee wrote:
There's a typo in one of your errors:
22:1:27 ERROR LASTCHECK :WEBSERVER update failed, Diffrent Mapname
This is not a problem. There are plenty of typos and bad English in the log messages. Some are fixed in time. some are not.
On April 29 2013 11:40 MnM.Xia wrote:
20:52:43 --------------------------
20:52:43 Game Start detected
20:52:43 Searching memory for character profiles for game HotS
20:52:43 Reading Memory ...OK
20:52:43 OK Found Memory-Profile in Active-Profiles!
20:53:23 Pre-trigger: Reading web profiles
20:53:27 Webgrabber: Player false
20:53:31 Webgrabber: Opponent true
20:53:31 Pre-trigger: Done reading web profiles
20:53:31 Pre-Trigger done
21:6:43 --------------------------
There is nothing wrong with this log. It just says there was problem with your web profile. For example you might not have 1v1 web profile for that character or the web profiles are down. But the opponent's 1v1 profile could be read.
|
On April 29 2013 16:50 Hairy wrote:Show nested quote +On April 29 2013 14:29 Chillyo wrote:
Ladder is locked, therefore MMR Stats should be locked as well, probably why. Wait until the new season starts. Leagues are locked, but points and MMR can still move.
Yes. MMR changes during the lock normally. No reason to lock. (In the end of last season there was a db lock because Blizzard had display bugs in their bnet profiles --> results calculated based on those profiles were inaccurate. Now there is no display bugs).
|
On April 29 2013 17:37 KillerofGods wrote:
make sure you have memory reader active so you can get a good game. Also make sure you keep sc2gears open while you'r playing the games.
Ya i have that activated and my sc2gears are open during my games.
Show nested quote +On April 29 2013 11:40 MnM.Xia wrote:
20:52:43 --------------------------
20:52:43 Game Start detected
20:52:43 Searching memory for character profiles for game HotS
20:52:43 Reading Memory ...OK
20:52:43 OK Found Memory-Profile in Active-Profiles!
20:53:23 Pre-trigger: Reading web profiles
20:53:27 Webgrabber: Player false
20:53:31 Webgrabber: Opponent true
20:53:31 Pre-trigger: Done reading web profiles
20:53:31 Pre-Trigger done
21:6:43 -------------------------- There is nothing wrong with this log. It just says there was problem with your web profile. For example you might not have 1v1 web profile for that character or the web profiles are down. But the opponent's 1v1 profile could be read.
I havent played any 1v1 games since I installed MMR Stats. But I have played many team games. Perhaps this doesnt work on team games?
|
On April 30 2013 03:02 MnM.Xia wrote:Show nested quote +On April 29 2013 17:37 KillerofGods wrote:
make sure you have memory reader active so you can get a good game. Also make sure you keep sc2gears open while you'r playing the games. Ya i have that activated and my sc2gears are open during my games. Show nested quote +On April 29 2013 11:40 MnM.Xia wrote:
20:52:43 --------------------------
20:52:43 Game Start detected
20:52:43 Searching memory for character profiles for game HotS
20:52:43 Reading Memory ...OK
20:52:43 OK Found Memory-Profile in Active-Profiles!
20:53:23 Pre-trigger: Reading web profiles
20:53:27 Webgrabber: Player false
20:53:31 Webgrabber: Opponent true
20:53:31 Pre-trigger: Done reading web profiles
20:53:31 Pre-Trigger done
21:6:43 -------------------------- There is nothing wrong with this log. It just says there was problem with your web profile. For example you might not have 1v1 web profile for that character or the web profiles are down. But the opponent's 1v1 profile could be read. I havent played any 1v1 games since I installed MMR Stats. But I have played many team games. Perhaps this doesnt work on team games?
Yep. Only works only for 1v1 games.
|
The plugin can calculate my MMR from unranked matches? I don't wanna play more ranked games this season =|
|
|
|
|
|
|
EPT
