|
After i click the green start button the top right will play my screen and on the left it says this.
Sat May 30 2009 20:35:43 : Selected video input device: Camtasia Studio Video Capture Driver
Sat May 30 2009 20:35:43 : Selected audio input device: Vinyl AC'97 Audio (WAVE)
Sat May 30 2009 20:35:50 : Renaming existing file from C:\Documents and Settings\Owner\My Documents\My Videos\sample.flv to C:\Documents and Settings\Owner\My Documents\My Videos\sample.4.flv
Sat May 30 2009 20:35:51 : Primary - Connected to FMS/3,0,1,123
Sat May 30 2009 20:35:51 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:35:51 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:35:51 : Session Started
Sat May 30 2009 20:35:52 : Video Encoding Started
Sat May 30 2009 20:35:52 : Audio Encoding Started
Sat May 30 2009 20:35:52 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:35:58 : Primary - Disconnected
Sat May 30 2009 20:36:00 : Primary - Re-establishing connection, attempt 1
Sat May 30 2009 20:36:00 : Primary - Reconnected to FMS/3,0,1,123
Sat May 30 2009 20:36:00 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:36:01 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:36:02 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:36:08 : Primary - Disconnected
Sat May 30 2009 20:36:09 : Primary - Re-establishing connection, attempt 1
Sat May 30 2009 20:36:09 : Primary - Reconnected to FMS/3,0,1,123
Sat May 30 2009 20:36:10 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:36:10 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:36:12 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:36:17 : Primary - Disconnected
Sat May 30 2009 20:36:18 : Primary - Re-establishing connection, attempt 1
Sat May 30 2009 20:36:18 : Primary - Reconnected to FMS/3,0,1,123
Sat May 30 2009 20:36:19 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:36:19 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:36:22 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:36:27 : Primary - Disconnected
over and over again
|
Sat May 30 2009 23:09:47 : Selected video input device: Camtasia Studio Video Capture Driver
Sat May 30 2009 23:09:47 : Selected audio input device: Microphone / Line In (SigmaTel
Sat May 30 2009 23:09:51 : Renaming existing file from C:\Users\Jonathan Drobig\Videos\sample.flv to C:\Users\Jonathan Drobig\Videos\sample.12.flv
Sat May 30 2009 23:09:51 : Primary - Connected to FMS/3,0,1,123
Sat May 30 2009 23:09:51 : Primary - Stream[livestream] Status: Success
Sat May 30 2009 23:09:52 : Primary - Stream[livestream] Status: NetStream.Publish.Start
Sat May 30 2009 23:09:52 : Session Started
Sat May 30 2009 23:09:52 : Video Encoding Started
Sat May 30 2009 23:09:53 : Audio Encoding Started
is all mine says
and I get nothing showing up on my stream even though when I go to the studio the live feed shows up but I cant do anything with it.
|
Belgium9944 Posts
On May 31 2009 12:38 Probe. wrote:
After i click the green start button the top right will play my screen and on the left it says this.
Sat May 30 2009 20:35:43 : Selected video input device: Camtasia Studio Video Capture Driver
Sat May 30 2009 20:35:43 : Selected audio input device: Vinyl AC'97 Audio (WAVE)
Sat May 30 2009 20:35:50 : Renaming existing file from C:\Documents and Settings\Owner\My Documents\My Videos\sample.flv to C:\Documents and Settings\Owner\My Documents\My Videos\sample.4.flv
Sat May 30 2009 20:35:51 : Primary - Connected to FMS/3,0,1,123
Sat May 30 2009 20:35:51 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:35:51 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:35:51 : Session Started
Sat May 30 2009 20:35:52 : Video Encoding Started
Sat May 30 2009 20:35:52 : Audio Encoding Started
Sat May 30 2009 20:35:52 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:35:58 : Primary - Disconnected
Sat May 30 2009 20:36:00 : Primary - Re-establishing connection, attempt 1
Sat May 30 2009 20:36:00 : Primary - Reconnected to FMS/3,0,1,123
Sat May 30 2009 20:36:00 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:36:01 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:36:02 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:36:08 : Primary - Disconnected
Sat May 30 2009 20:36:09 : Primary - Re-establishing connection, attempt 1
Sat May 30 2009 20:36:09 : Primary - Reconnected to FMS/3,0,1,123
Sat May 30 2009 20:36:10 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:36:10 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:36:12 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:36:17 : Primary - Disconnected
Sat May 30 2009 20:36:18 : Primary - Re-establishing connection, attempt 1
Sat May 30 2009 20:36:18 : Primary - Reconnected to FMS/3,0,1,123
Sat May 30 2009 20:36:19 : Primary - Stream[zork] Status: Success
Sat May 30 2009 20:36:19 : Primary - Stream[zork] Status: NetStream.Publish.Start
Sat May 30 2009 20:36:22 : Primary - Network Status: NetConnection.Connect.Closed status
Sat May 30 2009 20:36:27 : Primary - Disconnected
over and over again
hmm connection issues.. are you dropping frames in the log window in FMLE? Did you double check your FMS url and username/password etc?
|
Belgium9944 Posts
On May 31 2009 14:11 TransfuSe wrote:
Sat May 30 2009 23:09:47 : Selected video input device: Camtasia Studio Video Capture Driver
Sat May 30 2009 23:09:47 : Selected audio input device: Microphone / Line In (SigmaTel
Sat May 30 2009 23:09:51 : Renaming existing file from C:\Users\Jonathan Drobig\Videos\sample.flv to C:\Users\Jonathan Drobig\Videos\sample.12.flv
Sat May 30 2009 23:09:51 : Primary - Connected to FMS/3,0,1,123
Sat May 30 2009 23:09:51 : Primary - Stream[livestream] Status: Success
Sat May 30 2009 23:09:52 : Primary - Stream[livestream] Status: NetStream.Publish.Start
Sat May 30 2009 23:09:52 : Session Started
Sat May 30 2009 23:09:52 : Video Encoding Started
Sat May 30 2009 23:09:53 : Audio Encoding Started
is all mine says
and I get nothing showing up on my stream even though when I go to the studio the live feed shows up but I cant do anything with it.
if the live feed shows up everythings working, you just have to either cue the feed, and transition to cue in your studio or set AutoLive to true in your FMS url in FMLE
|
oh my god I cant believe this.... I spent a good solid hour trying everything and I just check my FMS url and true was missing the e..... Arrrrrrrrrrrggggg........
Thanks :p
|
Yeah i just figured out my problem. I went to check my email and it automatically sent a message saying my bitrate was too high i didn't realize it was 698. I got it working now and thanks rage for your posts.
|
i am having a problem streaming the full area inside the capture rectangle. it cuts off about 2 inches around the border and all i get is the middle part. im aware several other ppl are having this problem as well, but wondering if it's been solved yet.
also does the FMS URL really do anything? my mogulus screen can still stream without the url.
|
Bumping this with a few questions. I searched through the majority of the posts in this(massive, ughhh) thread to see if anyone already asked them and they sort of have been, but no one really answered.
1. If I want to stream the SPL or something and want to stream off my desktop, what do I change to make that little corner that streams in the top left to something bigger or to move it? I know it must have something to do with the 640*480 settings but I'm not sure which one(s). I would assume it's the "Input Size" in FMLE but idk if I have to change anything else too(like in Camtasia). I don't want to change anything and end up fucking myself over =S
2. If I want to do commentary on my stream how do I do that? I read that you don't change any audio input for Camtasia, that it is all done in FMLE but under audio where it says "Device" it lets my either pick my speakers or my microphone. Can I not use both? Can I input the sounds from SC:BW and commentate overtop of that at the same time? I'm hoping to be able to do this for the NA State/province league when I stream live as a ref o.o;;
|
What about livestreaming Pro League? You use Camtasia, FML again or simple Procaster last? When I'm streaming from Daum or something I have only sound, but screen is black and my firends dosen't see anything. What's the problem?
Sry for my english.
|
Belgium9944 Posts
On June 01 2009 20:23 sajrus wrote:
What about livestreaming Pro League? You use Camtasia, FML again or simple Procaster last? When I'm streaming from Daum or something I have only sound, but screen is black and my firends dosen't see anything. What's the problem?
Sry for my english.
Use Procaster if you want to stream a video source.
|
Belgium9944 Posts
On June 01 2009 14:36 Grobyc wrote:
Bumping this with a few questions. I searched through the majority of the posts in this(massive, ughhh) thread to see if anyone already asked them and they sort of have been, but no one really answered.
1. If I want to stream the SPL or something and want to stream off my desktop, what do I change to make that little corner that streams in the top left to something bigger or to move it? I know it must have something to do with the 640*480 settings but I'm not sure which one(s). I would assume it's the "Input Size" in FMLE but idk if I have to change anything else too(like in Camtasia). I don't want to change anything and end up fucking myself over =S
use Procaster to stream video sources, or use VHScreenCap + FMLE.
2. If I want to do commentary on my stream how do I do that? I read that you don't change any audio input for Camtasia, that it is all done in FMLE but under audio where it says "Device" it lets my either pick my speakers or my microphone. Can I not use both? Can I input the sounds from SC:BW and commentate overtop of that at the same time? I'm hoping to be able to do this for the NA State/province league when I stream live as a ref o.o; /QUOTE]
Theres a lot of posts about this in this thread.
It's impossible unless:
1. You have a very good sound card that can handle mixing the sources (pretty rare)
2. You use Virtual Audio Cables, a complex software package designed for things like this
3. You do it ghetto style with 2 headphone splitters and 2 audio cables.
|
Belgium9944 Posts
On June 01 2009 10:38 x89titan wrote:
i am having a problem streaming the full area inside the capture rectangle. it cuts off about 2 inches around the border and all i get is the middle part. im aware several other ppl are having this problem as well, but wondering if it's been solved yet.
also does the FMS URL really do anything? my mogulus screen can still stream without the url.
still haven't heard of a solution for this problem
about the fms url: it's impossible that you can stream to your mogulus account without the url if you're using fmle, the FMS url tells FMLE where to send the data stream. without it, the mogulus server wont receive a feed.
|
On June 01 2009 20:56 RaGe wrote:Show nested quote +On June 01 2009 20:23 sajrus wrote:
What about livestreaming Pro League? You use Camtasia, FML again or simple Procaster last? When I'm streaming from Daum or something I have only sound, but screen is black and my firends dosen't see anything. What's the problem?
Sry for my english. Use Procaster if you want to stream a video source.
RaGe I used it, but problem is that everyone hear sound from for example Daum (or any other player that I use) but there is no video. Maybe this's problem with FPS?
|
On June 01 2009 20:59 RaGe wrote:Show nested quote +On June 01 2009 14:36 Grobyc wrote:
Bumping this with a few questions. I searched through the majority of the posts in this(massive, ughhh) thread to see if anyone already asked them and they sort of have been, but no one really answered.
1. If I want to stream the SPL or something and want to stream off my desktop, what do I change to make that little corner that streams in the top left to something bigger or to move it? I know it must have something to do with the 640*480 settings but I'm not sure which one(s). I would assume it's the "Input Size" in FMLE but idk if I have to change anything else too(like in Camtasia). I don't want to change anything and end up fucking myself over =S use Procaster to stream video sources, or use VHScreenCap + FMLE. Show nested quote +2. If I want to do commentary on my stream how do I do that? I read that you don't change any audio input for Camtasia, that it is all done in FMLE but under audio where it says "Device" it lets my either pick my speakers or my microphone. Can I not use both? Can I input the sounds from SC:BW and commentate overtop of that at the same time? I'm hoping to be able to do this for the NA State/province league when I stream live as a ref o.o;; Theres a lot of posts about this in this thread. It's impossible unless: 1. You have a very good sound card that can handle mixing the sources (pretty rare) 2. You use Virtual Audio Cables, a complex software package designed for things like this 3. You do it ghetto style with 2 headphone splitters and 2 audio cables.
Thanks for the answer to question 1.
About question 2, since my stream's audio is whatever my speakers output would it not be possible to find a way to make my speakers repeat what I say into my microphone? This would automatically mix it with the SC:BW sound, no?
|
Belgium9944 Posts
On June 01 2009 21:34 sajrus wrote:Show nested quote +On June 01 2009 20:56 RaGe wrote:On June 01 2009 20:23 sajrus wrote:
What about livestreaming Pro League? You use Camtasia, FML again or simple Procaster last? When I'm streaming from Daum or something I have only sound, but screen is black and my firends dosen't see anything. What's the problem?
Sry for my english. Use Procaster if you want to stream a video source. RaGe I used it, but problem is that everyone hear sound from for example Daum (or any other player that I use) but there is no video. Maybe this's problem with FPS?
No its not a problem with FPS. It's your capturing program that doesnt capture the video for some reason. I'm not familiar with ProCaster, but this is a super common problem with any video capturing.
Doesn't it get resolved if you change the source to the actual program, instead of doing a desktop fixed size capture?
Try searching in the ProCaster help
|
Belgium9944 Posts
On June 02 2009 01:17 Grobyc wrote:Show nested quote +On June 01 2009 20:59 RaGe wrote:On June 01 2009 14:36 Grobyc wrote:
Bumping this with a few questions. I searched through the majority of the posts in this(massive, ughhh) thread to see if anyone already asked them and they sort of have been, but no one really answered.
1. If I want to stream the SPL or something and want to stream off my desktop, what do I change to make that little corner that streams in the top left to something bigger or to move it? I know it must have something to do with the 640*480 settings but I'm not sure which one(s). I would assume it's the "Input Size" in FMLE but idk if I have to change anything else too(like in Camtasia). I don't want to change anything and end up fucking myself over =S use Procaster to stream video sources, or use VHScreenCap + FMLE. 2. If I want to do commentary on my stream how do I do that? I read that you don't change any audio input for Camtasia, that it is all done in FMLE but under audio where it says "Device" it lets my either pick my speakers or my microphone. Can I not use both? Can I input the sounds from SC:BW and commentate overtop of that at the same time? I'm hoping to be able to do this for the NA State/province league when I stream live as a ref o.o;; Theres a lot of posts about this in this thread. It's impossible unless: 1. You have a very good sound card that can handle mixing the sources (pretty rare) 2. You use Virtual Audio Cables, a complex software package designed for things like this 3. You do it ghetto style with 2 headphone splitters and 2 audio cables. Thanks for the answer to question 1. About question 2, since my stream's audio is whatever my speakers output would it not be possible to find a way to make my speakers repeat what I say into my microphone? This would automatically mix it with the SC:BW sound, no?
It seems so easy in theory, but in practice it's pretty hard. This is the reason why in almost all casted shows online, you'll see one person being the observer, and one commentating on Vent, so you can hear both commentary and the game sounds.
The only thing I can imagine working besides the already mentioned things is: go to your Volume Control, Properties, and for your output device, make sure you check all the boxes, then click Ok. If Microphone is listed, try unmuting it.
The problem with this is, with most sound cards, this just gives one big beeeeeeeeep when recording Stereo Mix, or you wont be able to hear your microphone anyway.
It really isn't that easy. If you find a simple software solution to this with a normal sound card, let me know.
|
Okay, thanks. I'll mess around with it when I get home and let you know if I find anything.
|
|
|
Hi,I got the following Problem :
I set my stream and its online,so np for that,but I cant fix the Graphics cuz everytime I press the hotkey I need to switch to windows cuz there is some weird thing D:
:
"Unamed file was not found"
If I click okay on it,nothing happends,but then I got to switch to broodwar again and the graphics are still crappy,and i try to fix it again with the hotkey I need to go to windows again to click the "unnamed file was not found" away.
Thanks for every help.
|
Is it possible to download the On-Demand videos off someone's Mogulus page?
|
|
|
|
|
|
EPT
