| Forum Index > BW General |
|
DarkSanta
Netherlands76 Posts
E.g. I can't select anything when using FMLE for Audio and I can't select anything when using Camtasia at options ---> audio. Because of this, I'm unable to record and / or stream with sound. I've tried a few things to fix this, reïnstalling the Audio Controller's driver (not a soundcard, it's onboard) and updating it to the latest version, but nothing worked. I'd appreciate it if anyone knows the answer to this problem. | ||
|
Racenilatr
United States2756 Posts
 it says it can't publish to the stream name or something. No clue what i'm doing here | ||
RaGe
Belgium9953 Posts
On May 26 2009 04:58 Racenilatr wrote: Help it says it can't publish to the stream name or something. No clue what i'm doing hereyour FMS url in FMLE is probably wrong | ||
|
Racenilatr
United States2756 Posts
| ||
|
Mohawk
Canada21 Posts
sorry, im a bit newb =s | ||
|
CoL_Drake
Germany455 Posts
The maximum bitrate of your streams is 500 Kbps, but your stream is being published at 548 Kbps. where can i change that ? in flash media live encoder or where ? | ||
|
CoL_Drake
Germany455 Posts
anyone interests ? | ||
|
Ziph
Netherlands970 Posts
On May 26 2009 20:37 CoL_Drake wrote: The bitrate of the stream XXX you are publishing on the channel XXX is too high. The maximum bitrate of your streams is 500 Kbps, but your stream is being published at 548 Kbps. where can i change that ? in flash media live encoder or where ? Yeah in the Flash Media Live Encoder Its to high because you have your video bitrate at 500 but also sound for 48 probably, so together its over the limit either lower your video bitrate or disable your sound. | ||
|
Marine50
Australia1764 Posts
Whats happening? Why can't I stream a smooth video? | ||
|
TuFFeR
Sweden30 Posts
On May 24 2009 01:02 Freaky[x] wrote: I don't know if anybody tried this, but currently I'm just using manycam. Basically what you do is just install camtasia and manyCam. (it's free btw) Once that's done, you run manyCam and choose your source (set it to full desktop) and then when you open livestream.com, it will stream it for you right away, you just have to chose the manycam camera (no need to run anything else but manyCam and your browser) It was easier for me to get it working this way, but I didn't check whether the quality was better or not and how to control when it's recording or not, but it seems to work fine. I tried Manycam and it didnt work with starcraft.. it didnt show anything. | ||
|
TuFFeR
Sweden30 Posts
On May 27 2009 16:22 Marine50 wrote: Whenever I am streaming on mogulus my stream flickers. It will play for 1 second then go black then play for 1 second and so on and so forth. Is this a bit rate or lag issue? Whats happening? Why can't I stream a smooth video? You might have to low connection, try to decrease the bitrate and see whats happening. What upload do you have? | ||
|
Grobyc
Canada18410 Posts
I'm using Vista and have downloaded Camtasia Studio 5.02 and when I go to tick off 'Live output capture' under Tools > Options > Video(tab) on the recorder I get an error that says "The 'Camtasia Studio Video Capture Driver' must be installed to use Live Output. Please install the "Live Output Support' using your product setup program." + Show Spoiler + ![[image loading]](http://i540.photobucket.com/albums/gg356/Grobyc_/Untitled.png) Can anyone help? | ||
|
RaGe
Belgium9953 Posts
On May 26 2009 05:16 Racenilatr wrote: how do i embedd thsi on teamliquid or w\e so it becomes a user stream? PM SonuvBob with your info. On May 26 2009 09:08 Mohawk wrote: Do i need to do all these steps if i use Procaster ? sorry, im a bit newb =s Procaster can't capture full screen SC afaik. I haven't tried yet, but unless it can use Camtasia as screen capture program, or allows codec change to the TechSmith Capture Codec, it won't work full screen. On May 26 2009 20:37 CoL_Drake wrote: The bitrate of the stream XXX you are publishing on the channel XXX is too high. The maximum bitrate of your streams is 500 Kbps, but your stream is being published at 548 Kbps. where can i change that ? in flash media live encoder or where ? Read the entire post please. You can change it in FMLE. Lower the video bitrate to below 450 if you're using 48 as audio bitrate. On May 27 2009 16:22 Marine50 wrote: Whenever I am streaming on mogulus my stream flickers. It will play for 1 second then go black then play for 1 second and so on and so forth. Is this a bit rate or lag issue? Whats happening? Why can't I stream a smooth video? You sure you didn't turn on auto-adjust in FMLE? You're from Australia, so you probably don't have enough upload bandwith to support decent quality streams. See if the same thing happens when lowering output resolution and bitrate. On May 28 2009 12:02 Grobyc wrote: I'm having trouble setting up Camtasia Recorder. I'm using Vista and have downloaded Camtasia Studio 5.02 and when I go to tick off 'Live output capture' under Tools > Options > Video(tab) on the recorder I get an error that says "The 'Camtasia Studio Video Capture Driver' must be installed to use Live Output. Please install the "Live Output Support' using your product setup program." + Show Spoiler + Can anyone help? When you install Camtasia, there's a screen that asks if you want to install Live Output support. My guess is that you just clicked speedily through the installation and didn't see it. It's unchecked by default and therefor not installed on your system right now. | ||
|
Grobyc
Canada18410 Posts
On May 29 2009 06:49 RaGe wrote: When you install Camtasia, there's a screen that asks if you want to install Live Output support. My guess is that you just clicked speedily through the installation and didn't see it. It's unchecked by default and therefor not installed on your system right now. Thanks a bunch RaGe! I just set up my own stream and thread for it! http://www.teamliquid.net/forum/viewmessage.php?topic_id=94251 | ||
|
TransfuSe
Canada201 Posts
Windows Vista 32bit 4GB RAM Core 2 Duo T9300 2x 8700M GT SLi It worked perfectly fien with just camtasia and FLME before they had to go and change everything. | ||
|
TuFFeR
Sweden30 Posts
| ||
|
RaGe
Belgium9953 Posts
| ||
|
TransfuSe
Canada201 Posts
On May 31 2009 09:31 RaGe wrote: I think they still allow FMLE. Where did you get this? When I linked FMLE encoder to my stream and clicked "start" it said it was live and broadcasting back on my mogulus channel it wasnt showing up. It just keeps saying "your channel is now live balhbalhb" over and over again. | ||
|
Probe.
United States877 Posts
On May 31 2009 10:31 TransfuSe wrote: When I linked FMLE encoder to my stream and clicked "start" it said it was live and broadcasting back on my mogulus channel it wasnt showing up. It just keeps saying "your channel is now live balhbalhb" over and over again. Thats what mines doing too. I just tried to set this up today and i carefully read and followed all your steps, but it doesn't show up in my channel. Mine also says you are now live but shows nothing else. | ||
|
RaGe
Belgium9953 Posts
On May 31 2009 12:18 Probe. wrote: Thats what mines doing too. I just tried to set this up today and i carefully read and followed all your steps, but it doesn't show up in my channel. Mine also says you are now live but shows nothing else. what does fmle say? can you connect to the Flash Media Server? | ||
| ||
StarCraft 2 StarCraft: Brood War Counter-Strike Other Games |
|
IntoTheTV X SOOP
Reynor vs Solar
ByuN vs SHIN
Clem vs MaxPax
herO vs Rogue
IPSL
WorsT vs nOmaD
Dewalt vs andersOn
AI Arena Tournament
IntoTheTV X SOOP
IPSL
Azhi_Dahaki vs ggnore13
Double vs WIZARD
Replay Cast
Replay Cast
Sparkling Tuna Cup
WardiTV Invitational
YoungYakov vs Lambo
SHIN vs TBD
Percival vs Shameless
Solar vs TBD
PiGosaur Cup
[ Show More ] |
|
|
EPT
