EPTis my cpu too hot
| Forum Index > Tech Support |
|
BetaWolf
United States39 Posts
| ||
|
Medrea
10003 Posts
| ||
|
BetaWolf
United States39 Posts
| ||
|
Akusa
United States62 Posts
| ||
|
BetaWolf
United States39 Posts
| ||
|
Josh_rakoons
United Kingdom1158 Posts
| ||
|
Myrmidon
United States9452 Posts
On April 20 2012 15:36 Medrea wrote: yeah thats a bit hot. If its on the one core that might be a defective CPU. Usually those are made into I3's I'm somewhat sure that all dual core i3 ever sold are dual core dies, not quad cores with disabled cores (and disabled furthermore, disabled L3 cache). With socket 1156, the quad cores were 45nm while the dual cores were 32nm. There are separate dual core designs for socket 1155 Sandy Bridge, and I don't think there are exceptions like the rare Phenom II X4 that are actually Thubans (the hex core) with disabled parts. | ||
|
Wurstbrot
Germany89 Posts
User was banned from Tech Support for being wrong. | ||
|
DooMNoThx
Bulgaria185 Posts
On April 20 2012 16:34 Wurstbrot wrote: 75-80°C are absolutly fine! A CPU can handle ~95-100°C. Lol please don't make such posts, there is a big difference between "can" and "should" 70-75 degrees during load is normal, higher is not ok. | ||
|
Moloch
Canada222 Posts
On April 20 2012 16:34 Wurstbrot wrote: 75-80°C are absolutly fine! A CPU can handle ~95-100°C. This is blatantly wrong. CPUs absolutely cannot handle those temperatures. Some GPUs can, but that is running hot even for them. According to this the max operating temperature for your CPU is 72.6C. Ideally, you'd want it a fair bit lower than that when your processor is under load. | ||
|
theBlues
El Salvador638 Posts
| ||
|
Capped
United Kingdom7236 Posts
On April 20 2012 17:10 TheBlueMeaner wrote: seems like a badly seated cpu cooler, get an aftermarket cooler (even better temps than the amazing stock cooler) and seat it correctly... I'll 2nd that. I have a scythe yasya (? i think xD) aftermarket cooler and the things beast. After 9 months without me dusting (i know i know, im waiting on new parts before doing it.) it still sits at 42-45oC under heavy load. (3+ hours of constant battlefield3) this is on an i5-2500k but still, aftermarket coolers are the shizzle! Also good heatsink paste helps a bit, make sure its seated properly, air bubbles are bad. | ||
|
Skeny
Australia121 Posts
Ps. Don't get an aftermarket cooler unless ur going to overclock. | ||
|
Kilocide
Canada13 Posts
For reference my I7 2600k is overclocked to 4.8 and peaks at 72 degrees under 24hour torture testing with stock cooling. Sandy can handle that temp. It's all about your thermal paste application. | ||
|
Medrea
10003 Posts
On April 20 2012 16:19 Myrmidon wrote: I'm somewhat sure that all dual core i3 ever sold are dual core dies, not quad cores with disabled cores (and disabled furthermore, disabled L3 cache). With socket 1156, the quad cores were 45nm while the dual cores were 32nm. There are separate dual core designs for socket 1155 Sandy Bridge, and I don't think there are exceptions like the rare Phenom II X4 that are actually Thubans (the hex core) with disabled parts. Oh. Really? Can you link a source? If not i believe you anyway. | ||
|
DooMNoThx
Bulgaria185 Posts
On April 20 2012 19:16 Kilocide wrote: One core is always hotter, not that much hotter tho. You fucked up the tim. Pull it out clean it and apply a high quality tim properly. there's an art to it. It's like dancing, less is more. You are trying to fill in microscopic imperfections on the surface of the cpu and heatsink. Too much and it cooks, too little and it cooks. For reference my I7 2600k is overclocked to 4.8 and peaks at 72 degrees under 24hour torture testing with stock cooling. Sandy can handle that temp. It's all about your thermal paste application. lol are you sure this is stock cooling ? I have 2600k at 4.7 and with 212+ cooler i get arround 75 degrees after 18 hours of stress testing, but stock cooling ? | ||
|
Grobyc
Canada18410 Posts
On April 20 2012 21:12 DooMNoThx wrote: lol are you sure this is stock cooling ? I have 2600k at 4.7 and with 212+ cooler i get arround 75 degrees after 18 hours of stress testing, but stock cooling ? Yeah I find that hard to believe too. I have my 2600k OC'd to 4.5 with a 212+. My temps are probably 70ish, but I would periodically get crashes and stalls if I OC'd past 4.6. | ||
|
BetaWolf
United States39 Posts
| ||
|
skyR
Canada13817 Posts
| ||
|
JingleHell
United States11308 Posts
On April 21 2012 01:18 Killamancer wrote: It turns out my heatsink had way too much dust in it. After cleaning it out, it doesn't go past 50c at load. How often should you clean the inside of your pc? Check it every couple of weeks. | ||
| ||
