| Blogs > KnT |
|
KnT
Australia243 Posts
Having access to many a 3D design program, I'll be drafting up different designs for you all to look at and comment on over the following weeks, followed by a community poll to finally decide which desk I'll end up making - fully documented here of course. So what say you, TL? If you could build the ultimate desk, what would you have on it?  | ||
|
DenTenker
United States606 Posts
Good luck on your desk! | ||
|
tl2212
Belize731 Posts
| ||
|
KnT
Australia243 Posts
| ||
|
Juliette
United States6003 Posts
to be fair, the desk I have now is ideal (I have an L shaped desk in a corner) but there's too many things on it. | ||
|
elmizzt
United States3309 Posts
| ||
|
KnT
Australia243 Posts
Also, the GF is now asking for a similar desk for her computer so we can have a room that "doesn't look mismatched" so I might need to go for a huge corner desk. Current plans are; Having a glass infinity mirror tabletop, like so but not near as bright. Will probably have a dial or something similar somewhere hidden in the desk to control brightness/colour; ![[image loading]](http://i.imgur.com/MRZeVQs.jpg) Built in power board Having as close to zero cable spaghetti as possible | ||
|
KnT
Australia243 Posts
Details: 1115x760x835 Cabling to run down the hole in the back behind the backboard to the computer. 2 Drawers, one long, one short ![[image loading]](http://i.imgur.com/qAYlvoT.jpg) | ||
|
GTPGlitch
5061 Posts
| ||
salle
Sweden5554 Posts
1 a sturdy desk, as little wobble as possible so steady, bulky and heavy is the way to go there. 2 different heights for where the keyboard sits and where the monitor(s) stand. most modern monitors don't have high enough stands to offset this and thus end up standing too low unless you have different heigh on the desk or wall mount them or something. 3 hard surface that can handle to be banged a bit (ie not glass or super polished metals etc which shows dents too easily) so like wood lacquered wood or something. 4 easily movable (like on wheels or something similar. so it can be moved out of the way when not in use but put in a good spot when working, or easy cleaning behind it so the vacuum cleaner doesn't pull out some cords or something, etc. 5 being able to change the height of the desk so much so that you can be standing while using the computer too. (so not just sitting while working, changing posture is very good, and standing is pretty good) 6 no weird corners but a smooth surface with rounded corners for as little possibilities to get scrapes from the edge of the desk when using it. I guess this is mostly practical things but I'd rather have a desk that I don't get inconvenienced by, or getting small scrapes or pain from some weird part of the design. Have had too many good looking desks that had flaws in them (cause I'm not silly rich and can get a perfect in all respects table.) | ||
| ||
|
|
Replay Cast
Wardi Open
WardiTV Invitational
Replay Cast
The PondCast
WardiTV Invitational
Replay Cast
uThermal 2v2 Circuit
Replay Cast
|
|
|
EPT
