| Blogs > koonzhoot |
|
koonzhoot
United States36 Posts
Recently I stumbled upon cubeecrfaft site with tons of cubee figures of all sorts of characters, and... It was inspiration to make my own cubie design. I came up with a line of prototypes, and here is the finished model. When it came to making some cubies with real faces, I though of these two guys  ![[image loading]](http://img830.imageshack.us/img830/6638/tastosisbykoonzhoot.jpg) Tasteless and Artosis rest in my hand >>>+ Show Spoiler + ![[image loading]](http://img171.imageshack.us/img171/9084/tastosis2bykoonzhoot.jpg) If you wish to make these two, feel free to PM me. I'll send you the scheme    | ||
|
Artifex
Belgium189 Posts
| ||
|
anatem
Romania1369 Posts
| ||
|
Rantech
Chile525 Posts
| ||
|
rastaban
United States2294 Posts
| ||
|
Ryusei-R1
United States2106 Posts
| ||
|
VTArlock
United States1763 Posts
| ||
|
myrmidon2537
Philippines2188 Posts
| ||
|
koonzhoot
United States36 Posts
On January 31 2011 23:52 rastaban wrote: I think my favourite part is the handsome nerd shirts half showing. Great work, how long did it take including the other prototypes? Well... It took me about 4-5 days First I had to figure out how to make a scheme, which I had never done before. Then I had to come up with a design different from one that is used on cubeecraft site, because I planned to give away my schemes for free to the fellow nerds and I wasn't sure if it was a copyright infringement. So.. About an hour for the original scheme, then an hour of cutting out and assembling for each prototype (there were three of them, see the picture below). + Show Spoiler + ![[image loading]](http://img121.imageshack.us/img121/5863/prototypesbykoonzhoot.jpg) And then I took some time to make these two: browsing for the photos, drawing caricature faces, colouring, cutting out, etc. About 2 hours on each one of them. | ||
| ||
|
|
OlimoLeague
OlimoLeague
Wardi Open
Tenacious Turtle Tussle
The PondCast
Replay Cast
SC Evo Complete
PassionCraft
Sparkling Tuna Cup
Wardi Open
|
|
|
EPT
