EPTWhat programs do u need to make vods?
| Forum Index > General Forum |
|
SpeedDemonToss
108 Posts
| ||
Bill307
Canada9103 Posts
1. You can get everything mentioned here via Google. 2. Download a program for recording your screen output, such as Camtasia or... that... other one that start's with an H. 3. Download the codec of choice. DivX recommended. 4. Download VirtualDub. 5. If you have Camtasia, then do the following, otherwise you're on your own: - Effects --> Cursor --> Hide Cursor - Options --> Preferences: - Video Setup --> Techsmith Screen Capture Codec (key frame every 100, Configure for Faster Compression) - choose frames/second (I have it set to 15.0, dunno what the recommended one is) - Program --> Hide Capture Rectangle, Solid Capture Rectangle, and Round frame size all checked; everything else unchecked 6. If you want audio as well, then do the following: - Effects --> Audio --> Record Audio - Options --> Preferences: - Check "Interleave audio" and set it to something like every 1 second - Audio Setup --> PCM format, 11.025 Khz, 16 Bit (8 BIT SOUNDS AWFUL), Mono 7. Go to Options --> Preferences --> Hotkeys and decide which hotkeys to use (e.g. F9 for start and F10 for end) 8. TURN OFF hardware acceleration (should be in your Display Properties --> Troubleshooting) 9. Start SC. Go onto BNet. Go into your game. Start your game. 10. AFTER THE GAME HAS STARTED, build + spread your workers, then press F9 to begin recording. 11. Once the game is over, press F10. The score screen and probably anything afterwards will come out really messed up in the VOD, if you choose to go beyond the end of the game. 12. Open the recorded file with VirtualDub. Set the following options: - Video --> Compression --> DivX 5.0.2 Codec (or whatever the latest version is) --> Configure --> 160 kbps encoding bitrate - Video --> Full processing mode - Video --> Filters --> Add --> 2:1 reduction (high quality) 13. If you recoded audio as well, then do the following: - Audio --> Full processing mode - Audio --> Compression --> MPEG Layer 3 (or MP3) --> 20 kbps, 11,025 Hz, Mono 14. Select File --> Save as AVI to save your compressed VOD. Okay, I think that's everything  . | ||
|
baal
10541 Posts
| ||
|
ToKoreaWithLuck
Norway227 Posts
| ||
|
Napoleon
Poland81 Posts
 | ||
Kacas
Brazil3143 Posts
pIII 500 the lowest resolution, it lag =( | ||
|
Rose[9]
France178 Posts
o w n e d | ||
|
Blaz_e_NUt
United States16 Posts
| ||
|
rOm
Latvia1208 Posts
| ||
|
SlimeVolleyBall
Canada23 Posts
| ||
|
baal
10541 Posts
On July 21 2003 18:12 Blaz_e_NUt wrote: 3.06ghz and I can't figure out how to work camtasia !-_C-; Try Hypercam.... is WAAAAAAYYYY easier to use. | ||
|
Bill307
Canada9103 Posts
On July 21 2003 11:46 baal wrote: 15 fps with a 1.4ghz... impressive i just cant make a VOD with my AMD 800mhz... no mather how i lower the settings it just wont work... Well, those settings let me make VODs without any significant cursor lag... until the trial period ended and Camtasia started adding its logo onto my recordings . Now I have to record everything uncompressed in order to make SC playable  .Would Hypercam (that's the name!) have better performance than Camtasia on Win XP? Though I think I read somewhere that Camtasia was better for NT-based systems, such as XP. I don't really care which one is easier to use: I simply followed the directions in that article and I've never had any problems since o_O. | ||
|
baal
10541 Posts
BTW... here is the code to release your camtasia : Version: 2.2.0 Name: LAXiTY s/n: C3EF1DC3333381444543 ------------------------------------------------------------------- dont you just want to kiss me ?  | ||
|
Bill307
Canada9103 Posts
    ... is it normal to have these feelings for another guy? | ||
| ||
