EPT
that's good to know.The Razer Diamondback Thread. - Page 2
| Forum Index > General Forum |
|
Hollow
Canada2180 Posts
that's good to know. | ||
ManaBlue
Canada10458 Posts
 1) I set it to 1000hz, and the mouse is running super smooth. When I check it with mouserate.exe, it peaks at just over 1000, but averages out to just over 700. Is that what I should be seeing, or is that a problem? It shows that the mouse can reach 1000, but most of my strokes don't get it there. 2) I used mousefix and then checked with accelfix to see if acceleration was still running. It said it was enabled, so I ran the removemousefix, then ran accelfix again and clicked yes. Then I rebooted and ran accel fix again to see if acceleration was off, but it still says it's enabled. What am I doing wrong here? | ||
|
Hollow
Canada2180 Posts
2) Well you should still use mousefix even tho it doesn't remove the acceleration for you, and in accelfix i can't really help you, it's simple as hell. It tells you if it's on or off, and you choose whether you want it on or off. Mess around with it im sure you will find a way. If it still doesn't work, PM me and i'll try finding another way to remove it (there's probably a key to remove in the registry or something like that) | ||
|
Aileon
United States299 Posts
I set it to 1000. It seems odd to me that it should be that low. I used both of the other programs, mousefix and accelfix. Should i mess with the sensitivity in razer options? I have accel and master sensitivity turned off, and speed set to 10. | ||
|
ManaBlue
Canada10458 Posts
On July 08 2006 21:27 Hollow wrote: 1) Yes it is perfectly normal that your average will be 700~ so is mine. 2) Well you should still use mousefix even tho it doesn't remove the acceleration for you, and in accelfix i can't really help you, it's simple as hell. It tells you if it's on or off, and you choose whether you want it on or off. Mess around with it im sure you will find a way. If it still doesn't work, PM me and i'll try finding another way to remove it (there's probably a key to remove in the registry or something like that) Well now I have mouse fix and accelfix both on to cancel accel. I'm not sure if it's working, but the mouse feels the same as it was before I used either. In any case, the usbrs prog to increase the hz definitely made the mouse smoother. I'm feeling much more comfortable with it in my hand already. Thanks for sharing all this stuff with us Loco. I'm loving this mouse now and I'm feeling even closer to being comfortable with this mouse. It really doesn't even feel like the same mouse as before these changes. Big help. | ||
|
Hollow
Canada2180 Posts
On July 08 2006 22:10 Aileon wrote: Err. when I use mouse fix, it stays ion the upper 400s as the average, sometimes going over 500, but usually staying under. I set it to 1000. It seems odd to me that it should be that low. I used both of the other programs, mousefix and accelfix. Should i mess with the sensitivity in razer options? I have accel and master sensitivity turned off, and speed set to 10. That's pretty weird. I dunno. Has nothing to do with sensivity, when you move it very fast whats the highest rate you get? Not the average, but in the column? Still, 500 is better than 125. | ||
|
Aileon
United States299 Posts
I dunno where the drivers for my old microsoft mice are, but they could they be interfering? | ||
|
sdpgposd
United Kingdom1464 Posts
| ||
|
sdpgposd
United Kingdom1464 Posts
| ||
|
Hollow
Canada2180 Posts
| ||
|
sdpgposd
United Kingdom1464 Posts
1 gig of ram mobo: gigabyte... brand new socket 939 or whatever. All new shit i bought and assembled about a month ago. mouse/etc: razer copperhead exact mat Nah, my USB is 2.0 from my motherboard (im pretty sure - i'll double check a bit later on when its actually light here) - this may be the problem. | ||
|
Lisk
Latvia376 Posts
500hz stable is enough. Most mice can't do 1khz stable. Fluctuating is bad. For the copperhead - 1khz isn't 100% stable/working. Also the latest firmware/driver make a huge difference. And I mean INSTALL THE FIRMWARE!! Not just the drivers. goddamnit my vocabulary is failing me in the morning... | ||
|
sdpgposd
United Kingdom1464 Posts
| ||
|
UrASofty
Canada772 Posts
| ||
|
funkie
Venezuela9377 Posts
On July 13 2006 22:01 UrASofty wrote: where do you download the latest firmware for the diamondback? PROBLEM I have downloaded the latest driver from your website, but I can't find the firmware. SOLUTION You will have to install the driver first, by default the firmware can be found in C:\Program Files\Razer\Copperhead\Firmware. The file extension is .s19. | ||
|
Hollow
Canada2180 Posts
EDIT: Nope there's nothing more to download except the drivers for the Diamondback. | ||
|
funkie
Venezuela9377 Posts
On July 13 2006 22:38 Hollow wrote: I don't know if there's a diamondback firmware... Lisk was talking about Copperhead. EDIT: Nope there's nothing more to download except the drivers for the Diamondback. You are right, my bad sorry  . | ||
|
UrASofty
Canada772 Posts
And to add, when i put the sensitivty to 10, i cant even move the clicker properly or make a split properly, is this suppose how fast 10 sens is suppose to be? | ||
|
Alborz
Canada1551 Posts
| ||
|
Drunkish dEegle
2 Posts
It sounds like alotta fun that package, so if you could make it ready for upload again I would greatly appreciate it! thx in advance | ||
| ||
