| Forum Index > Dota 2 General |
|
Slomo
Germany7198 Posts
On November 10 2018 23:06 teddyoojo wrote: what a boring ass major so far, absolutely 0 surprise wins, in the last group stage match the only possible surprise is if alliance manages to beat fwd now I think Peeeduur saw your comment and decided to produce an upset. | ||
|
Artisreal
Germany9235 Posts
I have no idea how many fittings and what kind of I need lol. Guess I'm gonna check out the subreddit in hope of a visual guide xd | ||
|
HwangjaeTerran
Finland5967 Posts
| ||
|
Artisreal
Germany9235 Posts
CPU & GPU: ryzen 1600 and 2080 non ti 2 radiators: 120 and 240, both 30mm (more doesn't fit the case) pump is prolly gonna be a DDC 1T reservoir size dependent on where I can fit it Noctua fans soft tubing no serious overclocking intended, just want a small and silent pc for the occasional gaming excess. | ||
|
PoulsenB
Poland7755 Posts
| ||
|
HwangjaeTerran
Finland5967 Posts
compression fittings are the usual type and it says the inner and outer diameter on there like 10/16 etc. that simply has to match the diameters of the tubing you get, the inner diameter of the tubing doesn't give any advantages past 10mm since the fluid is restricted by the aforementioned thread size you need two fittings for each object in the loop, the blocks themselves come with the plugs for any extra inlets/outlets angled adapters 45 and 90 degrees can be helpful especially when working with small cases and can make for shorter tube runs, a couple of those don't really affect the performance standalone pumps can be quite fiddly too, since I think that comes with 3/8 barbed fittings by default, so you'd have to either get a different housing for the pump or fiddle with 2 kinds of fittings, also for ddc pumps there are heatsinks but I don't know if they actually affect performance, it's really a timesaver to get a ddc pump ready with 1/4" threads also, I assume you know this but the gpu block has to be exactly right for the model of 2080 you have On November 12 2018 21:56 PoulsenB wrote: why do you need water cooling in Finland, can't you just put your pc outside a window? i did the math and it's actually cheaper since I live on the 8th floor | ||
|
Artisreal
Germany9235 Posts
I think after what you've said I'll be on the lookout for some angled fittings for the rads as well as gpu. About bends and stuff I won't worry since it's gonna be soft tubing at the start. The note about the pump actually having a different fitting size is entirely new to me (maybe should've read the description more carefully lol), so that's a really good point. The case is rather space constricted, which is why a pump-reservoir combo might just be too tall. I think there's about 10 to max 15 cm from the top of the case to the top of the GPU. Going to measure that at the end of the month when I can put my hands on the case. If there's 15 cm space, I can get a pump/reservoir combo. If not, I'll have to separate them. | ||
|
Plansix
United States60190 Posts
The excesses of that game take hold. The plot loses a lot of steam with a shooting gallery that takes place on some dumb island. The narrative attempt to pull the gang apart is clear, but rather than simply having our characters trapped on an Island and doing mundane things to find a ship home, we are part of a revolution and some VIDEO GAME SHIT. It has to be the weakest part of the game that literally could have been skipped over or handled with a much slower narrative. The final part of the game seems to have adopted some tropes of the Western that I am not fond of being repeated in Red Dead. I will have to see how it plays out, but the narrative has taken a sharp turn which makes the action the hero seem feel fruitless. It fits with nature of the character, but I know I have +10 hours left in the story. I have concerns that 10 hours of downer content will wear me down. The long and short of it, there is a lot of game here and I’m not sure it is all good. Also the hunting is still a god damn pain in the ass because I cannot god damn see the things I’m hunting from far enough away. | ||
|
Pontual
Brazil3038 Posts
On November 13 2018 00:19 Plansix wrote: Red Dead 2 Update: The excesses of that game take hold. The plot loses a lot of steam with a shooting gallery that takes place on some dumb island. The narrative attempt to pull the gang apart is clear, but rather than simply having our characters trapped on an Island and doing mundane things to find a ship home, we are part of a revolution and some VIDEO GAME SHIT. It has to be the weakest part of the game that literally could have been skipped over or handled with a much slower narrative. The final part of the game seems to have adopted some tropes of the Western that I am not fond of being repeated in Red Dead. I will have to see how it plays out, but the narrative has taken a sharp turn which makes the action the hero seem feel fruitless. It fits with nature of the character, but I know I have +10 hours left in the story. I have concerns that 10 hours of downer content will wear me down. The long and short of it, there is a lot of game here and I’m not sure it is all good. Also the hunting is still a god damn pain in the ass because I cannot god damn see the things I’m hunting from far enough away. Sounds just like the videogamedunkey review + Show Spoiler + https://www.youtube.com/watch?v=Fn3g25ZEbak looks like they struggled to make a climax for the game artifact seems fun, liked watching the tournament this weekend. Will get to it once its released. | ||
|
Plansix
United States60190 Posts
It is the Game of Thrones problem with villains. Ramsy Bolton is a good villain, but the audience shouldn’t spend years waiting for that villain to get what is coming to him. By the time it happened, it wasn’t enough. PS: I keep looking at Warframe, because god that game looks weird in ways I like. But I’ve installed it several times and every time it is a wall of pure non-sense and confusing progression. | ||
|
HwangjaeTerran
Finland5967 Posts
On November 12 2018 22:38 Artisreal wrote: Thanks for the advice! I think after what you've said I'll be on the lookout for some angled fittings for the rads as well as gpu. About bends and stuff I won't worry since it's gonna be soft tubing at the start. The note about the pump actually having a different fitting size is entirely new to me (maybe should've read the description more carefully lol), so that's a really good point. The case is rather space constricted, which is why a pump-reservoir combo might just be too tall. I think there's about 10 to max 15 cm from the top of the case to the top of the GPU. Going to measure that at the end of the month when I can put my hands on the case. If there's 15 cm space, I can get a pump/reservoir combo. If not, I'll have to separate them. There's a lot of different kinds of soft tubing, softest ones are easiest to work but they also kink easily, harder ones won't do sharp bends so the angled adapters get you halfway there. My case is roughly the same size as the H200 and I used 5 or 6 angled adapters for 10 fittings, maybe could've used a few less but that would've taken at least a day longer. And it's really tough to work in such cramped space. | ||
|
Faruko
Chile34173 Posts
i mean, even the lyrics fits the trailer lol It's marketing on an unprecedented meta level You put the trailer without music, people will put it and share it and you get tons of tweets and rt without needing to pay for the rights | ||
|
Pontual
Brazil3038 Posts
One of the best ads i've seen all year, and its fan made lol | ||
|
Plansix
United States60190 Posts
| ||
|
HwangjaeTerran
Finland5967 Posts
| ||
|
Faruko
Chile34173 Posts
Honestly, it looks far better than it has any right to be, especially the Mr. Mime part lol | ||
|
Plansix
United States60190 Posts
| ||
|
PassiveAce
United States18076 Posts
do most people imagine pikachu having fur? | ||
|
Plansix
United States60190 Posts
| ||
|
Faruko
Chile34173 Posts
| ||
| ||
|
|
Replay Cast
Escore
IntoTheTV X SOOP
Korean StarCraft League
GSL
Replay Cast
Sparkling Tuna Cup
WardiTV Weekly
Afreeca Starleague
GSL
[ Show More ] |
|
|
EPT
