EPTI guess this is some more proof for skeptics on the baking video cards thing.
For those wondering, it's an ATI Radeon x700 pci-e (lolol)
Baked my video card
| Blogs > k20a |
|
k20a
Canada412 Posts
I guess this is some more proof for skeptics on the baking video cards thing. For those wondering, it's an ATI Radeon x700 pci-e (lolol) | ||
|
FragKrag
United States11567 Posts
| ||
|
Nytefish
United Kingdom4282 Posts
 | ||
|
emperorchampion
Canada9496 Posts
| ||
|
floor exercise
Canada5847 Posts
| ||
micronesia
United States24805 Posts
| ||
|
mahnini
United States6862 Posts
| ||
|
jpak
United States5045 Posts
![[image loading]](http://img.youtube.com/vi/R7jUqoKVY-k/0.jpg) Just some random image I found. | ||
|
floor exercise
Canada5847 Posts
On September 27 2010 07:53 micronesia wrote: What the hell is this about baking video cards? Some kinda joke or have I missed some cute thing with video cards in the past? Basically either it's a running gag or real and I can't 100% rule it out :p solder points brittle over time and electrical contact weakens sometimes making your card inoperable, putting in the oven at over 365f melts all the solder parts so they can sort of reset | ||
|
Versita
Canada1032 Posts
On September 27 2010 07:57 mahnini wrote: it's real. i forget the details though. melts the damaged solder joints so they can rejoin i think edit: oop he beat me to it | ||
|
dukethegold
Canada5645 Posts
I, however, had no idea that the same works for ATI cards too. | ||
|
HwangjaeTerran
Finland5967 Posts
On September 27 2010 07:53 micronesia wrote: What the hell is this about baking video cards? Some kinda joke or have I missed some cute thing with video cards in the past? Basically either it's a running gag or real and I can't 100% rule it out :p It works. Some video cards have bad solder or have simply overheated one too many times. Heating the solder therefore might just get the piece of shit to work. It´s either that or I´m a romanian. | ||
|
jacen
Austria3644 Posts
individually heating the solder points would be a better idea. | ||
|
Loser777
1931 Posts
On September 27 2010 08:20 jacen wrote: sadly you are cutting months of the cards lifetime when you bake it. individually heating the solder points would be a better idea. Where do you get that number from? It's the same method that was used when the card was first assembled -cards are not soldered together piece by piece. | ||
|
Osmoses
Sweden5302 Posts
edit: On September 27 2010 08:05 HwangjaeTerran wrote: It works. Some video cards have bad solder or have simply overheated one too many times. Heating the solder therefore might just get the piece of shit to work. It´s either that or I´m a romanian. A solder is bad because it has become overheated too many times. Fix by overheating it again. | ||
|
KOFgokuon
United States14912 Posts
On September 27 2010 08:25 Osmoses wrote: I cannot see how this could be true. If it's bad for your graphics card to get hotter than 80 degrees celcius while running, why would it be a good idea to bake it in 200 degrees? Its like telling someone they can get rid of viruses by using a magnet on their harddrive. edit: A solder is bad because it has become overheated too many times. Fix by overheating it again. There's no current running through it when it's in the oven | ||
|
R1CH
Netherlands10342 Posts
| ||
|
jacen
Austria3644 Posts
On September 27 2010 08:24 Loser777 wrote: Where do you get that number from? It's the same method that was used when the card was first assembled -cards are not soldered together piece by piece. the number comes from -) knowing how ICs work -) knowing what diffusion is -) common sense In short, you are heating your card to almost twice the recommended temperature above 0°C. This increases diffusion in the sillicone crystal by huge ammounts making already "smeared" (for the lack of a better word) curcuits more likely to break. individually heating the solder points would keep most of the heat away from the chips (gpu and vram) as it dissipates very quickly when getting transportet through the lines on the board. | ||
|
rainei
Canada1316 Posts
| ||
|
Subversion
South Africa3627 Posts
On September 27 2010 08:54 R1CH wrote: This is fixed | ||
| ||
