|
On December 22 2011 14:17 Jumperer wrote:
is it possible to stream on this computer? AMD sempron 3100+. 517MHz, 736 MB ram. Geforce 4 onboard graphic card.
+ Show Spoiler [Original] +go to RUN command and type in 'dxdiag' then there will be a new window that shows up, it will find the 'Display' tab, once there look for the 'Approx. Total Memory' and see if your card is at least 128 MB
i have never tried with a 64MB card, so you should still try with one as low as that, but any lower i know it will not work since i have two comps one that can barely stream, and one that cannot, the one that barely streams, is 128MB internal graphics card.
Pentium 4@3.0 GHz - 1.24 GB Ram
128 MB video card.
FMLE settings
200kbps Upload for video feed - 400x300 output resolution, if i go higher on the Output Res it makes nothing work.
hope this information can be a minor advisory, still give it a whirl, ya never know, a good processor is a good processor
after re-reading your post while talking about processors, i can tell you that it should not work on your computer, but if your desperate still try. but i can say 100% that it should not work.
|
On December 23 2011 02:00 Modesty00 wrote:Show nested quote +On December 22 2011 13:26 Golgotha wrote:
Thank you Fold for helping me get my stream working! The problem was not in the directions or compatibility with Windows 7. I was just a bumbling fool that did not read directions carefully enough!
So, if you get a black screen on jtv, make sure that you put the STREAM CODE where it says 'Stream' inside FMLE 2.5.
ALSO! You will see a black screen if you look at your stream from the viewpoint of the broadcaster! Thus, to check on your stream make sure you go to the url that your viewers will see!
My set up was:
Windows 7
FMLE 2.5
Camtasia 5
And now my friend got same problem... Win7 Camtasia 5.1, Flash media encoder 3.2
hmmm this sound to me that u both updated camtasia
|
On December 23 2011 02:00 Modesty00 wrote:Show nested quote +On December 22 2011 13:26 Golgotha wrote:
Thank you Fold for helping me get my stream working! The problem was not in the directions or compatibility with Windows 7. I was just a bumbling fool that did not read directions carefully enough!
So, if you get a black screen on jtv, make sure that you put the STREAM CODE where it says 'Stream' inside FMLE 2.5.
ALSO! You will see a black screen if you look at your stream from the viewpoint of the broadcaster! Thus, to check on your stream make sure you go to the url that your viewers will see!
My set up was:
Windows 7
FMLE 2.5
Camtasia 5
And now my friend got same problem... Win7 Camtasia 5.1, Flash media encoder 3.2
hey dont use 3.2 use 2.5. also camtasia version 5 is what I used. try to get everything set up and send me a screen shot of the encoding log and the FMLE options.
|
On December 23 2011 03:13 Golgotha wrote:Show nested quote +On December 23 2011 02:00 Modesty00 wrote:On December 22 2011 13:26 Golgotha wrote:
Thank you Fold for helping me get my stream working! The problem was not in the directions or compatibility with Windows 7. I was just a bumbling fool that did not read directions carefully enough!
So, if you get a black screen on jtv, make sure that you put the STREAM CODE where it says 'Stream' inside FMLE 2.5.
ALSO! You will see a black screen if you look at your stream from the viewpoint of the broadcaster! Thus, to check on your stream make sure you go to the url that your viewers will see!
My set up was:
Windows 7
FMLE 2.5
Camtasia 5
And now my friend got same problem... Win7 Camtasia 5.1, Flash media encoder 3.2 hey dont use 3.2 use 2.5. also camtasia version 5 is what I used. try to get everything set up and send me a screen shot of the encoding log and the FMLE options.
But it worked before with 3.2.. Anyway i deleted once again everything and Dl camtasia 5.0 - not 5.1 , then Flash encoder 2.5 and so far is working, need to test it. Idk maybe Camtasia or flash version made the problem as one user said. (excuse my eng)
|
Hey i have problem. in FMLE i have Wed Dec 28 2011 08:47:12 : Selected video input device: Camtasia Studio Video Capture Driver
Wed Dec 28 2011 08:47:13 : Selected audio input device: Zintegrowane audio Intel(r)
Wed Dec 28 2011 08:47:26 : Profile loaded : C:\Documents and Settings\Marcinos\Dane aplikacji\Adobe\Flash Media Encoder 2.5\startup.xml
Wed Dec 28 2011 08:47:26 : Selected video input device: Camtasia Studio Video Capture Driver
Wed Dec 28 2011 08:47:26 : Selected audio input device: Zintegrowane audio Intel(r)
Wed Dec 28 2011 08:47:31 : Primary - Connected
Wed Dec 28 2011 08:49:10 : Renaming existing file from C:\Documents and Settings\Marcinos\Moje dokumenty\Moje wideo\sample.flv to C:\Documents and Settings\Marcinos\Moje dokumenty\Moje wideo\sample.21.flv
Wed Dec 28 2011 08:49:11 : Primary - Stream Status: Success
Wed Dec 28 2011 08:49:12 : Primary - Stream Status: NetStream.Publish.Rejected
Wed Dec 28 2011 08:49:12 : Primary - Unable to stream. Network problem at server.
Wed Dec 28 2011 08:49:12 : Primary - Network Status: NetConnection.Connect.Closed status
Wed Dec 28 2011 08:49:12 : Session Started
Wed Dec 28 2011 08:49:12 : Primary - Disconnected
Wed Dec 28 2011 08:49:12 : Video Encoding Started
Wed Dec 28 2011 08:49:12 : Audio Encoding Started
Wed Dec 28 2011 08:49:13 : Primary - Reestablishing connection, try 1
Wed Dec 28 2011 08:49:14 : Primary - Reconnected
Wed Dec 28 2011 08:49:14 : Primary - Stream Status: Success
Wed Dec 28 2011 08:49:14 : Primary - Stream Status: NetStream.Publish.Rejected
Wed Dec 28 2011 08:49:14 : Primary - Network Status: NetConnection.Connect.Closed status
Wed Dec 28 2011 08:49:14 : Primary - Disconnected
Wed Dec 28 2011 08:49:19 : Primary - Reestablishing connection, try 1
Wed Dec 28 2011 08:49:20 : Primary - Reconnected
Wed Dec 28 2011 08:49:20 : Primary - Stream Status: Success
Wed Dec 28 2011 08:49:21 : Primary - Stream Status: NetStream.Publish.Rejected
Wed Dec 28 2011 08:49:21 : Primary - Network Status: NetConnection.Connect.Closed status
Wed Dec 28 2011 08:49:21 : Primary - Disconnected
This... No idea what to do, someone can help me? :S
|
+ Show Spoiler [Unrealted to guide] +From my limited experience, I would say that it is most likely that you did not put that livestream url (the long personal one) in the proper place in FMLE. At least, that's what happened to me when I did that xD
By the way, big thanks to the maker and contributors of this guide. I set it up pretty much overnight.
There is one thing I'd like to correct (maybe): stereo mixer in Vista. I'm not sure if this is because my Vista is different somehow due to it being in a laptop, but a lot of what was mentioned didn't exist or was not necessary. So, I guess it should be noted that this might be laptop-only, or something.
I didn't need to download VAC, all I had to do was this:
Stereo Mix for Vista
1. Open up Control Panel -> Hardware and Sound -> Manage Audio Devices (under the 'Sound' directory)
2. Click on 'Recording'
3. Right click on the empty white area under the available options, and check 'Show Disabled Devices'
4. Stereo Mix should pop up ^^ Click on it and then click the Properties' button
5. Set 'Device Usage:' to 'Use this device (enable)'
6. Under 'Levels' you can control the output volume.
7. Under 'Enhancements' I only have 'DC Offset Cancellation' checked.
8. Advanced -> '2 channel, 16 bit, 44100 Hz (CD Quality)', and check both boxes beneath that.
Some of those were set as default but I just want to cover all bases ^^; It worked like a charm for me. For anyone who wants to have a place to start testing from in terms of volume (under 'Levels' and with other programs), I have my system volume set at ~30%, music volume set at 100%, and mix volume set at ~80%. This has been a good set-up for me, so try that out and see how it works for you.
Hope this helps! Cheers~
|
Should turn out something like this.
![[image loading]](http://bildr.no/thumb/1062448.jpeg)
|
Hi, I am wondering..Is it not possible to have a webcam running while you are in fullscreen mode with camtasia / FMLE??
|
|
|
On December 28 2011 18:18 Jealous wrote:
From my limited experience, I would say that it is most likely that you did not put that livestream url (the long personal one) in the proper place in FMLE. At least, that's what happened to me when I did that xD
By the way, big thanks to the maker and contributors of this guide. I set it up pretty much overnight.
There is one thing I'd like to correct (maybe): stereo mixer in Vista. I'm not sure if this is because my Vista is different somehow due to it being in a laptop, but a lot of what was mentioned didn't exist or was not necessary. So, I guess it should be noted that this might be laptop-only, or something.
I didn't need to download VAC, all I had to do was this:
1. Open up Control Panel -> Hardware and Sound -> Manage Audio Devices (under the 'Sound' directory)
2. Click on 'Recording'
3. Right click on the empty white area under the available options, and check 'Show Disabled Devices'
4. Stereo Mix should pop up ^^ Click on it and then click the Properties' button
5. Set 'Device Usage:' to 'Use this device (enable)'
6. Under 'Levels' you can control the output volume.
7. Under 'Enhancements' I only have 'DC Offset Cancellation' checked.
8. Advanced -> '2 channel, 16 bit, 44100 Hz (CD Quality)', and check both boxes beneath that.
Some of those were set as default but I just want to cover all bases ^^; It worked like a charm for me. For anyone who wants to have a place to start testing from in terms of volume (under 'Levels' and with other programs), I have my system volume set at ~30%, music volume set at 100%, and mix volume set at ~80%. This has been a good set-up for me, so try that out and see how it works for you.
Hope this helps! Cheers~
Good point, you can do that as well and it seems like the same method as what you do under Windows 7. I'll edit that part to make it a bit more clear. Thanks.
On December 30 2011 13:55 GGzerG wrote:
Hi, I am wondering..Is it not possible to have a webcam running while you are in fullscreen mode with camtasia / FMLE??
You can add a camera in Camtasia but not sure how that works. It probably doesn't display it where you want to anyway.
No worries 
If you see no reply to a post it's because I've already PMed them so yeh just ask and I'll try to answer.
|
I got my stream working and it says I'm live but the screen is black even while I'm playing. So everything seems to be working but the video isn't actually showing up. Did this happen to anyone else? Any suggestions on how to fix this?
edit: im using FMLE 3.2 + Camtasia Recorder
edit: works with XSplit and Windowmode, but would prefer the other option + Fullscreen
|
On January 04 2012 06:14 tryummm wrote:
I got my stream working and it says I'm live but the screen is black even while I'm playing. So everything seems to be working but the video isn't actually showing up. Did this happen to anyone else? Any suggestions on how to fix this?
edit: im using FMLE 3.2 + Camtasia Recorder
edit: works with XSplit and Windowmode, but would prefer the other option + Fullscreen
There are too many issues that could fit this description, imo. The few things I can think of would be:
Is the screen black even outside of the game? If yes, then:
1. Did you set up the dimensions and location of the screen capture properly in both Camtasia and FMLE?
2. Did you set up the option of 'Live Output Mode' in Camtasia as opposed to regular recording?
3. Double check to see that you have all the proper video configurations - sometimes default doesn't suit your system, especially if you modified it with a new graphics card or something.
If no, then:
1. Have you tried stopping and starting Camtasia recording while in-game?
2. Have you tried running it without an add-on (like a Launcher of some sort)?
3. Have you tried re-installing BW?
If none of this helps, try FMLE 2.5, that's what's been working for me ^^ Also, you should post your OS.
That is all I could think of ;p Sorry~
|
I'm using FLME 2.5 with Camtasia 5, and whenever I start recording in Camtasia, it doesn't show up in the FLME video devices. Any ideas?
|
On January 08 2012 02:50 TBone- wrote:
I'm using FLME 2.5 with Camtasia 5, and whenever I start recording in Camtasia, it doesn't show up in the FLME video devices. Any ideas?
Yeah you probably forgot to click on enable live output under tools options video/live.
@tryummm yes, you need 2.5. I had the same inexplicable issue.
|
CPU: AMD Phenom II X4 Black Edition Multi-Core 3.2 Ghz 8.0 Mb Total Cache
OS: XP Professional
Justin.tv/Canadiumsc
Upload speed: 1.91 Mbps
I just finished downloading FMLE and Camtasia but I can't seem to configure my video settings in FMLE. Also an error message appears sometimes that says
"Video Capture Device Not Selected
Please select video capture device connected to your system."
However, there are no options in message box and I have to click around to find the hidden okay button to make it go away. What am I doing wrong?
Also I tried skipping to the "Configure Camtasia" portion of the tutorial and under Tools-->Options there is no tab a called Capture and I wasn't able to find or select any of the options I'm supposed to configure.
I apologize if this makes no sense. This is my first time using this software. Not to be sexist but I think I sound like a stereotypical female talking to a mechanic about her broken car and all the weird noises it's making 
|
On January 07 2012 02:01 Jealous wrote:Show nested quote +On January 04 2012 06:14 tryummm wrote:
I got my stream working and it says I'm live but the screen is black even while I'm playing. So everything seems to be working but the video isn't actually showing up. Did this happen to anyone else? Any suggestions on how to fix this?
edit: im using FMLE 3.2 + Camtasia Recorder
edit: works with XSplit and Windowmode, but would prefer the other option + Fullscreen There are too many issues that could fit this description, imo. The few things I can think of would be: Is the screen black even outside of the game? If yes, then: 1. Did you set up the dimensions and location of the screen capture properly in both Camtasia and FMLE? 2. Did you set up the option of 'Live Output Mode' in Camtasia as opposed to regular recording? 3. Double check to see that you have all the proper video configurations - sometimes default doesn't suit your system, especially if you modified it with a new graphics card or something. If no, then: 1. Have you tried stopping and starting Camtasia recording while in-game? 2. Have you tried running it without an add-on (like a Launcher of some sort)? 3. Have you tried re-installing BW? If none of this helps, try FMLE 2.5, that's what's been working for me ^^ Also, you should post your OS. That is all I could think of ;p Sorry~
Okay thanks, ill try FMLE 2.5 and if that doesn't work I'll continue playing in windowed mode.
|
Until now I streamed with Camtasia but I am not satissfied with the quality.I tried to stream with Xsplit and window mode but it lags very hard (in windows mode) even when not streaming.I heard that it is something that u can do to not lag on windows mode.Tx
|
My stream randomly turns off sometimes.
A viewer says "It doesn't even load"; as far as I can tell, my FMLE and camtasia are working fine, and I think the online/offline is working on TL too. Just at twitch.tv it just turns off.
I just started using minilauncher to play on fish. Anyone else have similar problem?
On top right off the stream it says OFFLINE but I can see viewers. Also the viewer can hear music.
?_?
|
On January 11 2012 19:12 StarPanther66 wrote:
Until now I streamed with Camtasia but I am not satissfied with the quality.I tried to stream with Xsplit and window mode but it lags very hard (in windows mode) even when not streaming.I heard that it is something that u can do to not lag on windows mode.Tx
With Camtasia you should increase the output size, that way you'll get better quality. I'd also suggest switching codec to h264. It probably won't be as clear as people streaming in windowmode, but fullscreen feels a lot better, so it's worth it (imo). Streaming windowed is more CPU-demanding as far as I know.
|
Hello, would it be possible to stream BW with such a comp? AMD Turion X2 Dual Core, ATI radeon 3100, 2 gb ram
|
|
|
|
|
|
EPT
