|
On April 08 2012 10:19 L3gendary wrote:Show nested quote +On March 18 2012 09:03 sabas123 wrote:
or yust get Xfire, you can stream bw with it on jtv, you only wont be able to see the loby I just want to echo this statement, xfire is awesome and it does everything for you and it works in fullscreen. Easiest setup by far. I will have to try what snm said as well. ps. snm what kind of computer and internet do you have? Your stream is really smooth.
I have typical college internet (will have to fudge around with settings and lower quality when I go home T_T) and lenovo Y560p laptop. I can post specific hardware specs if you want.
|
On April 09 2012 03:27 supernovamaniac wrote:Show nested quote +On April 08 2012 10:19 L3gendary wrote:On March 18 2012 09:03 sabas123 wrote:
or yust get Xfire, you can stream bw with it on jtv, you only wont be able to see the loby I just want to echo this statement, xfire is awesome and it does everything for you and it works in fullscreen. Easiest setup by far. I will have to try what snm said as well. ps. snm what kind of computer and internet do you have? Your stream is really smooth. I have typical college internet (will have to fudge around with settings and lower quality when I go home T_T) and lenovo Y560p laptop. I can post specific hardware specs if you want.
I don't believe it's a hardware issue. I have a quad core 3.2GHz cpu. I could try overclocking it i suppose. I only have 1mb upload tho but i thought that would be enough.
|
My audio and mic seems too quiet using FMLE 2.5 and onboard audio. I hear everything fine, other people hear me fine on teamspeak. Anyone have this problem before?
|
Hello I am wondering if anyone ever figured out how to run a webcam while streaming in fullscreen mode? I know it can be done easily in windowed mode, but I would really like to know if it is possible in fullscreen, thanks a lot.
|
On April 13 2012 14:50 GGzerG wrote:
Hello I am wondering if anyone ever figured out how to run a webcam while streaming in fullscreen mode? I know it can be done easily in windowed mode, but I would really like to know if it is possible in fullscreen, thanks a lot.
Yes if you do it using Xsplit and uscreencapture you can stream fullscreen and have webcam. Just read SNM's post in the previous page about it. If it doesn't work it probably is just some registry settings that need fixing.
Will edit the OP to include that by next week.
|
Pics please for the xsplit guide, snm.
|
On April 14 2012 16:28 Wala.Revolution wrote:
Pics please for the xsplit guide, snm.
fold probably has everything necessary.
Though, I would like to point out:
If you're a caster, this is not necessary. Windowed mode casting is so much easier compared to Full Screen casting. If you're a player who hate the frame skips in Windowed mode, however, I highly suggest that you do this
Keep in mind that XSplit has watermark now, unless you pay for the product.
|
Yeah I want to play bw in fullscreen.
|
On April 14 2012 17:27 Wala.Revolution wrote:
Yeah I want to play bw in fullscreen.
What help do you need with it. Hop on to IRC and I can help you out now.
|
How to stream BW fullscreen using XSplit and UScreenCapture.
What you will need:
Setting up UScreenCapture:
- Unzip and install UScreenCapture
- Unzip uscreencapprog_remove_cursor and copy the files inside uscreencapprog to your UScreenCapture folder.
This should be either in C:\Program Files\UnrealStreaming\UScreenCapture\ or C:\Program Files (x86)\UnrealStreaming\UScreenCapture\ on a 64bit system. It will alert you about replacing certain files.
- Your UScreenCapture folder should now look like this: + Show Spoiler +
Next step involves editing your registry so only do one of the following:
Windows XP or older:
- You do this by either unzipping and running this registry file or doing it manually as follows:
+ Show Spoiler [Changing the registry settings manually] + - Start regedit by pressing the Start button then press run, type in regedit and hit enter.
- On the left pane click on HKEY_CURRENT_USER/Software/Classes/VirtualStore/MACHINE/SOFTWARE/
- Right click on the SOFTWARE folder icon and click New -> Key. Name this UNREAL.
- Right click on the UNREAL folder icon and click New -> Key. Name this LIVE.
- Right click on the LIVE folder icon and click New -> Key. Name this UScreenCapture.
- Now you need to add 5 REG_DWORD entries in the key by right clicking on the right pane and clicking New -> DWORD Value five times.
- Rename and edit each entry accordingly, making sure you set the Base to Decimal each time.
Top: 0
Bottom: 480
Left: 0
Right: 640
FrameRate: 30
- It should look like this. + Show Spoiler +
Windows Vista or Windows 7:
- You do this by either unzipping and running this registry file (32bit) or registry file (64bit) or doing it manually as follows:
+ Show Spoiler [Changing the registry settings manually] + - Start regedit by pressing the Start button, type in regedit and hit enter. Press Yes to the dialog box that pops up.
- On the left pane click on HKEY_LOCAL_MACHINE/SOFTWARE/ or HKEY_LOCAL_MACHINE/SOFTWARE/Wow6432Node/ if you're on a 64bit machine
- Right click on the SOFTWARE or Wow6432Node folder icon and click New -> Key. Name this UNREAL.
- Right click on the UNREAL folder icon and click New -> Key. Name this LIVE.
- Right click on the LIVE folder icon and click New -> Key. Name this UScreenCapture.
- Now you need to add 5 REG_DWORD entries in the key by right clicking on the right pane and clicking New -> DWORD Value five times.
- Rename and edit each entry accordingly, making sure you set the Base to Decimal each time.
Top: 0
Bottom: 480
Left: 0
Right: 640
FrameRate: 30
- It should look like this. + Show Spoiler +
-----------------------------------------------------------------------------------------------------------------------------------------
Streaming using XSplit and UScreenCapture:
- Load Xsplit.
- Add -> Camera -> UScreenCapture. Drag the image in the preview window so it fills up all of it.
If you only see the top left of your screen, everything should be fine. + Show Spoiler +
- To start streaming, click on Broadcast -> JustinTV. Click on it again to stop streaming.
This is essentially the same thing SNM posted up, just worded differently. If there's any mistakes or you need help, just post or PM me. Need to restructure the OP so will add it there later. This will work with FMLE as well and I'll write about that later if i get it working.
Thanks SNM. 
|
Ah yes, forgot to mention that part. If you don't like camtasia then you can use this as an alternative method to capture full screen. XSplit is what I chose to stream with because of the webcam combination; however with UScreenCapture, you can pick either FMLE or XSplit based on your preference.
|
hmmm . is fine but color is messed up? :O how to deal with the colour mess
|
UScreenCapture doesn't show up when I try to add camera. Is it because I installed in a different default directory?
I assume Camtasia doesn't work with xsplit fullscreen?
|
On April 15 2012 15:15 S2Glow wrote:
hmmm . is fine but color is messed up? :O how to deal with the colour mess
That's the Win7 problem, not XSplit + UScreenCapture. Blizzard has an official fix, you can look that up on TL or Blizzard's support page
On April 16 2012 04:12 Wala.Revolution wrote:
UScreenCapture doesn't show up when I try to add camera. Is it because I installed in a different default directory?
I assume Camtasia doesn't work with xsplit fullscreen?
AFAIK Camtasia doesn't work last time I tried it. If you just installed UScreenCapture, restart your computer if you haven't done so yet just to make sure.
|
Restarted, still doesn't show up.
EDIT: tested with camtasia and it worked with xsplit.
|
On April 16 2012 04:22 Wala.Revolution wrote:
Restarted, still doesn't show up.
EDIT: tested with camtasia and it worked with xsplit.
Can you detailed what you've done with the uscreencapture? Installing it in a different directory shouldn't matter at all and if it does just try the default directory.
Also, what did you do to make camtasia work with xsplit? When I last tried it on a Win XP machine it couldn't fix the colour.
On April 16 2012 04:17 supernovamaniac wrote:Show nested quote +On April 15 2012 15:15 S2Glow wrote:
hmmm . is fine but color is messed up? :O how to deal with the colour mess That's the Win7 problem, not XSplit + UScreenCapture. Blizzard has an official fix, you can look that up on TL or Blizzard's support page
His problem is that the colour is normal for him in game but the stream colour is messed up.
|
I downloaded, installed it somewhere else (chose to do it on HDD instead of SSD since it defaults to that) then replaced the files per instruction.
Then I see no UScreenCapture in XSplit, so I tested it with camtasia since that popped up, and asked a friend to see if it works, and it did. Works like FME so I pause/restart camtasia in-game to fix colors. Just tested it again and it works. Windows 7 with camtasia 5.
|
yeahh.. my stream colour messed up. i fixed that colour issues long time ago.. any help? i want to stream but i hate window mode T_T
|
Wow this new full screen method is a very nice find assuming all the files are legit. I could always stream full screen with camtasia on W7 but the video quality was crap. It may be worth noting to up the output resolution in Xsplit (mine defaulted to some 5xx*4xx) but I changed it to match input resolution of 640x480, which provided for nice video quality. I may play around with it more later to see if upping the output resolution will further increase quality. Nice find again, it makes me want to start streaming bw again.
|
Hey all, i am trying to figure all this out to start streaming, this is a wonderful guide, however i have encounter a bit of a problem, while setting up my stream audio with SCFH + FMLE (for the video) and for the audio i am useing VAC (demo version ) with stereo mix, i got to the point where VAC now has 2 cables active. However, now with "Line 1" set as my default playback i hear no sound of my music i have playing , i believe this is normal until i enter the .BAT file as listed in the guide, but when using the Audio Repeater (MME) im not very sure what i am suppose to be doing at this point.
On the drop down menu for "wave in"
"Microsoft sound mapper"
"stereo Mix (Realtek High Definiti"
"Line 1 (Virtual audio cable)
"Microphone (Realtek High Definiti"
and for "wave out"
"none"
"microsoft sound mapper"
"line 1 (virtual audio cable)
"Speakers (Realtek High Definiti"
"Microphone (Realtek High Definiti"
I am unsure what to do here or put in the .Bat file as a my sound card input and output, I am not very tech savy when it comes to these things, and any help would be appreciated , also if you need more information let me know.
|
|
|
|
|
|
EPT![[image loading]](http://i.imgur.com/JSf4B.png)
![[image loading]](http://i.imgur.com/Rss2G.png)
![[image loading]](http://i.imgur.com/dO8AQ.png)
![[image loading]](http://i.imgur.com/JvcDQ.png)
