|
On September 05 2017 17:31 Aylear wrote:Show nested quote +On September 05 2017 17:07 Arvendilin wrote: Is there a way to use this with MPC instead of VLC? since VLC fucks with colour saturation Streamlink does technically work with MPC, but you'll need to mess with the .bat file a bit. More on that in a bit. I haven't added native support for MPC because 1) extra work for me, and 2) some command lines are missing. Most notably --file-caching and --network-caching don't work, but you also can't add a meta title to an MPC window. When VLC pops up, it properly titles the window with the name you input, i.e. Bisu, Stork, Flash. MPC can't do that, so the window title remains something generic like "stdin". Anyway, to use this setup in MPC you need the following: - At least version 1.7 of MPC (1.6 or below will give file not found errors) - Edit the bat file with the following values: Open the .bat file in notepad++ or notepad. Near the top of the file you'll see this line: set vlcpath= ...which by default is blank. Type in the path to your MPC player, i.e. set vlcpath=C:\Program Files\MPC-HC\mpc-hc64.exe Next, scroll down to the bottom of the .bat file and find the following line: start /B streamlink --loglevel=error --player="%vlcpath% --file-caching=5000 --network-caching=5000 --meta-title=%name%" %url%/%id% %output% Change this line to: start /B streamlink --loglevel=error --player="%vlcpath%" %url%/%id% %output% ...which removes the "--file-caching=5000 --network-caching=5000 --meta-title=%name%" bit since MPC can't use those. This worked on my system just fine. Edit: If there is sufficient interest, I can make it so the .bat file accepts MPC by default as an option when you launch it. Let me know if this is something anyone else wants, otherwise I'm sticking with the basic VLC setup.
You are a literal god, thanks so much!
|
2 small little infos for everyone who wants to use MPC aswell:
Some streams might only get audio not video, to fix that, go to options > Internal filters > Splitters and then increase stream analysis duration, this will give it time to detect every stream it gets send!
The second thing is that ofcourse have to go into multi window mode if you want to watch multiple streams, I know this is easy but I was confused for about 10 secs so I thought I'd let everyone know that that option exists!
|
Afreeca is such a pain to watch sometimes. Errors and lag everywhere ((
|
i have this error message, is there a solution to it?
|
5377 Posts
Yes, don't use AWS server for now. It's been broken for about a week.
|
On September 09 2017 04:15 pheer wrote: Yes, don't use AWS server for now. It's been broken for about a week.
I've found some channels load with countdown, then stopped, donno what's the reason.
|
On September 09 2017 05:06 raymix1 wrote:Show nested quote +On September 09 2017 04:15 pheer wrote: Yes, don't use AWS server for now. It's been broken for about a week. I've found some channels load with countdown, then stopped, donno what's the reason. Those usually start working for me after a couple of attempts (have to wait out the counter each time).
|
Sorry if already asked but does this work on mobile devices or only pc?
|
On September 09 2017 05:06 raymix1 wrote:Show nested quote +On September 09 2017 04:15 pheer wrote: Yes, don't use AWS server for now. It's been broken for about a week. I've found some channels load with countdown, then stopped, donno what's the reason.
Yeah it's weird when that happens. When it does, you can let the countdown finish, then close that VLC window and load the same stream up again and it will work fine though!
|
On September 09 2017 13:51 RowdierBob wrote: Sorry if already asked but does this work on mobile devices or only pc? Pretty sure just PC. The software only has installations for Windows, OSX, and Linux.
|
For those of you who may have difficulty watching streams on Afreeca:
This season Afreeca made the decision to not stream the ASL on Twitch or YouTube.
Some people have a lot of difficulty watching streams from Afreeca.com, myself included. Buffering and connectivity issues are common. If you're experiencing a lot of buffering or drops, consider this solution. It's a quick setup which will let you watch Afreeca streams in VLC using a simple launcher. It also allows for better connectivity -- I personally can't watch Afreeca streams in source quality from their main site, but using Streamlink+VLC I have no problems doing so.
I have updated the .bat launcher to include http://www.afreecatv.com/aslenglish (the main English ASL stream). If you're a current user of my launcher, download the new Starcraft Stream Viewer.bat file here. If you haven't tried this setup yet, it may work well for you.
NOTE: The Amazon AWS CDN is still out of commission, so you will need to use GSCDN for the time being. We're still waiting for updates on this.
EDIT: The following name entries will let you connect to either of the streams:
Primary Korean stream: • asl1 • asl • afstar1
Primary English stream (Tastosis): • asl2 • asleng • aslenglish
Secondary English stream (EsportsJohn & FlashFTW): • asl3 • asleng2 • aslenglish2 • asl2eng2
POV Stream (rumored): • asl4 • aslpov
|
i got as far as the .bat step. i am on OSX, what command should I run or download in lieu of a windows bat file?
|
sAw
965 Posts
This is amazing, thank you so much! This was a lot easier than I expected, 2 minutes of "work".
|
On September 10 2017 16:26 [Fin]Vittu wrote: i got as far as the .bat step. i am on OSX, what command should I run or download in lieu of a windows bat file? Streamlink command line to connect to any channel is...
streamlink afreeca.com/channelname gs_original ...where gs_original connects to GSCDN, in quality "original" (source).
Example commands would be:
streamlink afreeca.com/afstar1 gs_original (Connects to Korean ASL stream in source quality)
streamlink afreeca.com/aslenglish gs_hd (Connects to English ASL stream in HD quality)
streamlink afreeca.com/rlaxordyd gs_sd (Connects to Bisu in SD quality)
|
On September 10 2017 16:49 Aylear wrote:Show nested quote +On September 10 2017 16:26 [Fin]Vittu wrote: i got as far as the .bat step. i am on OSX, what command should I run or download in lieu of a windows bat file? Streamlink command line to connect to any channel is... streamlink afreeca.com/channelname gs_original ...where gs_original connects to GSCDN, in quality "original" (source). Example commands would be: streamlink afreeca.com/afstar1 gs_original (Connects to Korean ASL stream in source quality) streamlink afreeca.com/aslenglish gs_hd (Connects to English ASL stream in HD quality) streamlink afreeca.com/rlaxordyd gs_sd (Connects to Bisu in SD quality)
you are a god. thank you for taking your time to explain this.
|
On September 10 2017 16:49 Aylear wrote:Show nested quote +On September 10 2017 16:26 [Fin]Vittu wrote: i got as far as the .bat step. i am on OSX, what command should I run or download in lieu of a windows bat file? Streamlink command line to connect to any channel is... streamlink afreeca.com/channelname gs_original ...where gs_original connects to GSCDN, in quality "original" (source). Example commands would be: streamlink afreeca.com/afstar1 gs_original (Connects to Korean ASL stream in source quality) streamlink afreeca.com/aslenglish gs_hd (Connects to English ASL stream in HD quality) streamlink afreeca.com/rlaxordyd gs_sd (Connects to Bisu in SD quality) Sigh, looks like afreeca broke everything again. I need to update linux script as well, again. Thanks for the notice, I am too lazy to investigate their continuous interface changes.
|
If you were using aws, yes, that is currently broken and no one knows why. GSCDN is the only one that's up.
|
On September 10 2017 18:10 letian wrote:Show nested quote +On September 10 2017 16:49 Aylear wrote:On September 10 2017 16:26 [Fin]Vittu wrote: i got as far as the .bat step. i am on OSX, what command should I run or download in lieu of a windows bat file? Streamlink command line to connect to any channel is... streamlink afreeca.com/channelname gs_original ...where gs_original connects to GSCDN, in quality "original" (source). Example commands would be: streamlink afreeca.com/afstar1 gs_original (Connects to Korean ASL stream in source quality) streamlink afreeca.com/aslenglish gs_hd (Connects to English ASL stream in HD quality) streamlink afreeca.com/rlaxordyd gs_sd (Connects to Bisu in SD quality) Sigh, looks like afreeca broke everything again. I need to update linux script as well, again. Thanks for the notice, I am too lazy to investigate their continuous interface changes.
Hey Letian, thanks for maintaining the linux script. If you need help, I would like to help! I was planning to change the script and make a pull request on GH, but since you are aware of the issue I think I don't need to.
|
On September 10 2017 18:37 PhilipJayFry wrote:Show nested quote +On September 10 2017 18:10 letian wrote:On September 10 2017 16:49 Aylear wrote:On September 10 2017 16:26 [Fin]Vittu wrote: i got as far as the .bat step. i am on OSX, what command should I run or download in lieu of a windows bat file? Streamlink command line to connect to any channel is... streamlink afreeca.com/channelname gs_original ...where gs_original connects to GSCDN, in quality "original" (source). Example commands would be: streamlink afreeca.com/afstar1 gs_original (Connects to Korean ASL stream in source quality) streamlink afreeca.com/aslenglish gs_hd (Connects to English ASL stream in HD quality) streamlink afreeca.com/rlaxordyd gs_sd (Connects to Bisu in SD quality) Sigh, looks like afreeca broke everything again. I need to update linux script as well, again. Thanks for the notice, I am too lazy to investigate their continuous interface changes. Hey Letian, thanks for maintaining the linux script. If you need help, I would like to help! I was planning to change the script and make a pull request on GH, but since you are aware of the issue I think I don't need to. Sure, please update whenever it needs updating. I will see your pull request faster than I read about another afreeca innovation.
|
It says
Your input can't be opened: VLC is unable to open the MRL 'fd://0'. Check the log for details.
for me.
|
|
|
|